Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Manual tranny fill level?

Thread Tools
 
Search this Thread
 
Old Jan 12, 2018 | 09:01 PM
  #1  
Akjackson's Avatar
Thread Starter
Registered User
 
Joined: Jan 2018
Posts: 30
Likes: 0
Manual tranny fill level?

Ok. I know there’s plenty of info on this except that I have drained and filled my manual tranny with specified amount and is still not flowing out of fill hole. This is not my first manual tranny change. Manual says 2.4 qts. I put 3 full quarts of Amsoil manual tranny lube without getting to flow out. Should I keep filling? Shifting is a bit knotchy after change so I feel that it’s not at the proper level. Any risk of overfilling? How could this be so far off? I now have to order more Amsoil which won’t be here for three days and want to make sure before I order and don’t want to mix with the cheap autozone tranny fluid. Also my Haines manual calls for 3.2 quarts in the transfer case which doesn’t even take 1.5. Not sure what there thinking is here. That would be one huge transfer case.
Reply
Old Jan 12, 2018 | 09:09 PM
  #2  
se7enine's Avatar
Registered User
iTrader: (2)
 
Joined: Nov 2006
Posts: 546
Likes: 16
From: Reno , Nevada
My G52 takes around 4.1 quarts. W56 is 3.2 though. Do you know what trans you have?
T-Case is 1.5 - 1.7 qts

Last edited by se7enine; Jan 12, 2018 at 09:12 PM.
Reply
Old Jan 12, 2018 | 09:44 PM
  #3  
RAD4Runner's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2012
Posts: 7,124
Likes: 681
Escalade-year-engine-transmission-2WD/4WD-trim please?

From 1988 22RE FSM ....
Attached Thumbnails Manual tranny fill level?-screen-shot-2018-01-12-10.52.41-pm.png  

Last edited by RAD4Runner; Jan 12, 2018 at 09:54 PM.
Reply
Old Jan 12, 2018 | 11:50 PM
  #4  
wyoming9's Avatar
Registered User
iTrader: (1)
 
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Red face

I have always filled them to they leak on my face.

Nothing like misprints in manuals it happens all the time
Reply
Old Jan 13, 2018 | 06:41 AM
  #5  
Akjackson's Avatar
Thread Starter
Registered User
 
Joined: Jan 2018
Posts: 30
Likes: 0
Well I guess that would help. Sorry. It’s a 95 4runner 4wd 3.0 manual. I guess I will just order more from Amsoil and fill till it leaks out. Hope I’m not causing any damage if not totally full but would think 3 quarts would be sufficient till more oil arrives. I have no option in other vehicle at the moment.
Reply
Old Jan 13, 2018 | 09:40 AM
  #6  
scope103's Avatar
Registered User
15 Year Member
 
Joined: Sep 2007
Posts: 8,380
Likes: 871
From: San Francisco East Bay
Originally Posted by se7enine
My G52 takes around 4.1 quarts. W56 is 3.2 though. Do you know what trans you have?
T-Case is 1.5 - 1.7 qts
The transmission type is on the sticker on the door pillar.
The manual says a G58 needs 4.1qts. http://web.archive.org/web/201210210...nce/2maint.pdf
3.2qts is for an R150.
Reply
Old Jan 13, 2018 | 10:03 AM
  #7  
se7enine's Avatar
Registered User
iTrader: (2)
 
Joined: Nov 2006
Posts: 546
Likes: 16
From: Reno , Nevada
Originally Posted by scope103
The transmission type is on the sticker on the door pillar.
The manual says a G58 needs 4.1qts. http://web.archive.org/web/201210210...nce/2maint.pdf
3.2qts is for an R150.
My 84 is a G52 so that's where I got the 4.1 qts. That link also says a w56 is 3.1 qts so I was close on that.
Reply
Old Jan 13, 2018 | 01:26 PM
  #8  
Akjackson's Avatar
Thread Starter
Registered User
 
Joined: Jan 2018
Posts: 30
Likes: 0
Ok so it’s a R150f. I put in 3 qts so I guess I am a little shy. Will fill it to overflow when Amsoil order comes in. Would beyond .2 of a quart low make my shifting notch. Difficult to put in reverse? Just started happening after fluid change. I thought that if anything getting rid of the old dirty oil and putting in Amsoil would really smooth things out. Guess I will wait to see the difference.2 quarts makes.
Reply
Old Jan 20, 2018 | 06:41 AM
  #9  
Akjackson's Avatar
Thread Starter
Registered User
 
Joined: Jan 2018
Posts: 30
Likes: 0
So I just added another 2 was of oil and still has not come out the fill hole. That’s 5 qts of oil... and yes it is def the tranny fill plug. Where could it all be going if I am 1.8qts over specified amount and still not full?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
buzzthriller
Newbie Tech Section
25
Oct 13, 2012 07:31 PM
BMcEL
86-95 Trucks & 4Runners
6
Jul 7, 2012 12:44 AM
Ruined Adventures
86-95 Trucks & 4Runners
9
Mar 29, 2011 01:06 PM
SolidDigital
86-95 Trucks & 4Runners
61
Jul 23, 2010 12:22 AM
HawkFanatic
86-95 Trucks & 4Runners
10
Nov 19, 2005 06:21 PM




All times are GMT -8. The time now is 12:39 AM.