I've got a new cheaper plan!
Nov 27, 2005 | 07:51 AM
#241
Originally Posted by ravencr
No, just had some time off, and Kristen was really nagging me for getting it to look more like a normal vehicle again. She'll have to drive it a few times in the snow this winter, and she refuses to drive it when it looks the way it does. I still have to finish capping off the fenders, then get them line-x'd, and then it will be presentable enough for her, maybe!!
Chris
P.S. What year LC coils did you find that were 21" long? 8 wraps, right?
Chris
P.S. What year LC coils did you find that were 21" long? 8 wraps, right?
Nov 27, 2005 | 08:03 AM
#242
Thread Starter
Registered User
Joined: Dec 2002
Posts: 4,697
Likes: 0
From: Deep Gap, NC
Originally Posted by dragr1
E-mailed ya.
Chris
Dec 13, 2005 | 05:56 PM
#248
Thread Starter
Registered User
Joined: Dec 2002
Posts: 4,697
Likes: 0
From: Deep Gap, NC
Today, I got the following parts in:
1) All-Pro Extended Rear Brake Line
2) Tundra Front Coils
3) Lift Lips
And, I'm waiting to get my custom upper link urethane bushings from H&H Speed and Machine. It's coming together, and I'm really looking forward to the softer spring rate up front. Hopefully, it will equal the same as the rear, which would be ideal.
Chris
1) All-Pro Extended Rear Brake Line
2) Tundra Front Coils
3) Lift Lips
And, I'm waiting to get my custom upper link urethane bushings from H&H Speed and Machine. It's coming together, and I'm really looking forward to the softer spring rate up front. Hopefully, it will equal the same as the rear, which would be ideal.
Chris
Dec 13, 2005 | 07:01 PM
#249
Originally Posted by ravencr
Today, I got the following parts in:
1) All-Pro Extended Rear Brake Line
2) Tundra Front Coils
3) Lift Lips
And, I'm waiting to get my custom upper link urethane bushings from H&H Speed and Machine. It's coming together, and I'm really looking forward to the softer spring rate up front. Hopefully, it will equal the same as the rear, which would be ideal.
Chris
1) All-Pro Extended Rear Brake Line
2) Tundra Front Coils
3) Lift Lips
And, I'm waiting to get my custom upper link urethane bushings from H&H Speed and Machine. It's coming together, and I'm really looking forward to the softer spring rate up front. Hopefully, it will equal the same as the rear, which would be ideal.
Chris
Get good before and after pics and measurements!
Dec 13, 2005 | 07:48 PM
#250
Thread Starter
Registered User
Joined: Dec 2002
Posts: 4,697
Likes: 0
From: Deep Gap, NC
It won't happen till next week at the earliest. I have to go out of town Thursday for work. But, I'll definitely take some good pics and measurements of the front end. And, I'm hoping to come up with a viable extension for the e-brake. I was pretty hesitant to buy the Lift Lips, because as you know I'm not all that big on looks. But, I figure at some point, I need to make it look a tad better.
Chris
Chris
Dec 14, 2005 | 04:04 AM
#251
Originally Posted by ravencr
It won't happen till next week at the earliest. I have to go out of town Thursday for work. But, I'll definitely take some good pics and measurements of the front end. And, I'm hoping to come up with a viable extension for the e-brake. I was pretty hesitant to buy the Lift Lips, because as you know I'm not all that big on looks. But, I figure at some point, I need to make it look a tad better.
Chris
Chris
What exactly are the lift lips?
Dec 14, 2005 | 04:17 AM
#252
Thread Starter
Registered User
Joined: Dec 2002
Posts: 4,697
Likes: 0
From: Deep Gap, NC
Thread
Thread Starter
Forum
Replies
Last Post
matmattmatthew
86-95 Trucks & 4Runners (Build-Up Section)
10
Feb 9, 2021 04:15 PM
nvwiggins
86-95 Trucks & 4Runners (Build-Up Section)
13
Jun 16, 2016 03:05 PM
