X2, your leaving us in suspense Phil! lmao

 

Just getting back on my feet really. got a new job thats been taking up alot of time plus ive got to move out at the end of the year so times are just a bit hard to get much work done.

I did get the clutch kit and new spark plug wires. Just need to route the lines do some wiring and install the clutch stuff. Oh and still need the lines for coolant and gas.

I know I know ive been slackin but times have just been a bit hard. Its still being worked on so dont loose all hope

 

Anything new happened? its been like two weeks from the last post. Update!update!

 

Anything new happened? its been like two weeks from the last post. Update!update! lol, i totally understand about the whole money thing so many things i want for my rig and so little money haha but that's life i guess

 

Im sorry its been awhile but I will have pics one of these days and updates Been snowing like crazy too up here in seattle Ive been driving with chains on my 2wd chevy and love it I intend to work on it as soon as I get settled into my new place which I still need to find and only have a few days. Its been tuff!

youll all be the first to get to see the new work. Ive been learning alot at the machine shop Ive got alot of cool things im thinkin about doing. Motors on the stand but I have to work on the chevy pressure plate in order to run a bigger cheaper toyota disk off a 07 tacoma. Its the only disk that can be used bigger than AA, downey and NWOF, for less. The 07 Taco disk is 10.875 instead of the 10.5". I have to machine out the pressure plate surface to use the disk but I will gain a very nice clutch from it doing it aspecialy whith using the 11" flywheel. Should be perfect!

Im also contemplating what material to use for the collant lines. Im thinking steel for the cost and paint the inside or Copper. It has come down in price but I havent ever really worked with it before and I can easily get my hands on cheap steel.

Little update. Ill get more coming as soon as I possibly can cause i want to be wheelin my runner not my chevy Just not the same fun

 

im from maine and this snow is nothing but people are freaking out with this much snow, makes for fun wheeling though, some off road some on

 

I love this snow but all the idiots are out in the AWD and 4x4 driving 5mph.

To any in all in this state for the love of god if I pass you In my 2wd chevy and youve got either chains, 4x4 or AWD... GET OFF THE ROAD.

Your absolutly right about the people freaking thinking its a ton of snow. Granted its alot for this area cause I havent seen any snow like this since I was in 1st grade, but come on! Dont worry, if you pull up next to me at a stop light in this snow thinking your gonna get an easy pass... You bet your a$$ im gonna be a challanging race for it

idiots
STAY OFF MY ROADS AND TRAILS

 

i couldnt agree more^^^

 

 

Fill, updates? Come on!!!!!!!!!!!!

So. since its christmas time and all.....
Wanna sell me that 3.4?

Hopefully you get this thing running soon!

 

OK OK so I got some pics for you all finaly no its not running but its progress

So as I have found only 3 companies really sell the clutch kits for these swaps. For a pressure plate im using a centerforce I purchased for under 200 I believe from Jegs. Its 11" to match my 11" flywheel and works with 4.3 all the way up tp 454's. I have found the only disk I can use is a 10.5" from Downey, AA or NWOR. Well I take that back I wanted to run a bigger disk to go with my pressure plate being its 11" I wanted more. so I did some research and found this

Straight from the toyota dealer is a brand new 08 disk from a tacoma with the same r-series tranny and 21 spline. It measures 10 7/8 so is now the biggest possible to run instead of the 10.5"... Oh not to mention it cost me only $90 no shipping while the AA and all the others are over $120

The only issue is the center section is about 1/8" to big to fit into the centesection of the PP. SOOOOOOOO......

Got to love working at a machine shop



The disk now fits perfectly and will be bolted up very soon.

I just moved into my first house so work should be continuing very soon for you all including myself

Here are some pics for you all too last weekend in my friends rig

Enjoy

Got a new camera too so pic quality should be much better now











More to come very soon

 

Fill glad to hear it will be finished soon.

 

Should be fired soon. Just put the motor in the other day still need to wire it and run coolant lines which I should be doing this week I hope at least some. Want to fire it very soon and got some cool ideas for some of the stuff im addding to it also one of a kind since Im making most the parts now rather than buying.

 

Bump?????

 

Ill update some new pics this weekend. Ive been working hard on the motor just havent had a comp I can easily access right now. Youll see more this weekend I promis I have alot of pics to update you all with

Happy Friday

 

this is equivalent to porn for me i have to make sure no one is looking when getting my fix.

 

Pics pics pics!!!!!!!!!!!!

 

Hey uh fill, almost the end of the weekend!

 

yeah! uh I was there I know whats coming

 

Hey DATSUN i think you have something of mine @ your house!! but i cant remember what it is?? j/k

Thread clog over SORRY!