1WiCkEd_RuNNer's rig
Apr 14, 2005 | 11:43 AM
#21
Contributing Member
Joined: Dec 2002
Posts: 163
Likes: 0
From: Tacoma, WA
Originally Posted by upndair
Well, getting that motor in place and mounted was a HECK of a lot less work that the 350!
And besides both of the T-Cases together weigh less than the 203 or the 205 in Gibby's rig. Those things are more than just boat anchors.
Apr 14, 2005 | 02:35 PM
#24
Contributing Member
Joined: Dec 2002
Posts: 163
Likes: 0
From: Tacoma, WA
Hey Crash, I really like the set up you did for Gibby's console.....https://www.yotatech.com/forums/show...&postcount=134 wondering if I can get something like it! Because both you and I know that you can make it....just if you will!
Apr 14, 2005 | 02:38 PM
#25
Registered User
Joined: Oct 2002
Posts: 1,117
Likes: 0
From: Milton, WA
I think the more factory look is better in this case. I see a small issue because the shifters were setup for a 2" body lift, not 3... The shifters can very nicely be brought up in the stock location and the 2nd one up through the change carrier...
Apr 14, 2005 | 04:06 PM
#27
Thread Starter
Registered User
Joined: Jun 2002
Posts: 910
Likes: 0
From: GOLDBAR BABY!!!
Originally Posted by 1WiCkEd_RuNNer
Hey Crash, I really like the set up you did for Gibby's console.....https://www.yotatech.com/forums/show...&postcount=134 wondering if I can get something like it! Because both you and I know that you can make it....just if you will!
Apr 14, 2005 | 06:30 PM
#29
Contributing Member
Joined: Dec 2002
Posts: 163
Likes: 0
From: Tacoma, WA
Originally Posted by crash
What do you mean, it was easy 
What do you mean, we put the motor in....All you had to do is the motor mounts, by the way you do a lot better job than I would have that is for sure!
Apr 14, 2005 | 07:00 PM
#30
Thread Starter
Registered User
Joined: Jun 2002
Posts: 910
Likes: 0
From: GOLDBAR BABY!!!
Originally Posted by 1WiCkEd_RuNNer
What do you mean, we put the motor in....All you had to do is the motor mounts, by the way you do a lot better job than I would have that is for sure! Ya clown
I was refering to gibbys 350 stuffage
Apr 14, 2005 | 09:39 PM
#31
Contributing Member
Joined: Dec 2002
Posts: 163
Likes: 0
From: Tacoma, WA
SORRY 
But I will put a snorkle on this motor so I can follow Gibby and not have to go through all this again. At least all I will have to do is rebuild the engine instead of gutting and replacing with much much better stuff!
But I will put a snorkle on this motor so I can follow Gibby and not have to go through all this again. At least all I will have to do is rebuild the engine instead of gutting and replacing with much much better stuff!
Apr 15, 2005 | 11:29 AM
#33
Contributing Member
Joined: Dec 2002
Posts: 163
Likes: 0
From: Tacoma, WA
Yes it is. The intake is a edlebrock performer intake. It was take the old one to a machine shop for about the same price as a new one. So I opted to get the performer intake. I thought it was a good deal.
Apr 15, 2005 | 08:22 PM
#36
Contributing Member
Joined: Mar 2005
Posts: 1,871
Likes: 0
From: WA ,monroe
Originally Posted by 1WiCkEd_RuNNer
Yes it is. The intake is a edlebrock performer intake. It was take the old one to a machine shop for about the same price as a new one. So I opted to get the performer intake. I thought it was a good deal.
Apr 17, 2005 | 04:44 PM
#39
Contributing Member
Joined: Dec 2002
Posts: 163
Likes: 0
From: Tacoma, WA
Well Crash hopefully some of it can wait. I will be out of town this week in Alaska working making the big bucks so I can pay you more and get all the items you need! I will probably be like this.......
