OM617 to W56 New Adapter Kits for Sale!
#1
Registered User
Thread Starter
OM617 to W56 New Adapter Kits for Sale!
Please visit my website: Doomsdaydiesel.net to shop for OM617 and VW 1.9 Conversion kits.
Also, check out the facebook pages OM617 Swaps and Doomsday Diesel for the latest and greatest info.
Also, check out the facebook pages OM617 Swaps and Doomsday Diesel for the latest and greatest info.
Last edited by pyrojoe22; 08-16-2019 at 12:00 PM.
#5
Awesome. I will certainly be watching for the release of the complete swap kit. I have been drooling for years at the idea of a diesel under the hood of my 4Runner. However, I'm pretty limited in the way of fab skills so a comprehensive kit would certainly be appealing
#7
Registered User
Thread Starter
Hello again,
I've been hard at work cranking out adapter kits. I'm currently seeking out a V6 truck so I can get a kit designed for it. I've made some minor changes to my adapter kit. I've seen the starter fail to properly engage in a couple different scenarios, so I've started including a new dust cover laser cut from galvanized steel, and a galvanized starter spacer. The dust cover will space your starter out the factory spacing from the flywheel, and the spacer will space it out another 0.1". Some aftermarket flywheels have needed additional spacing, which is why I've started including a spacer. Here are some shots of the new plate and dust cover:
Thanks for the interest,
Joe
I've been hard at work cranking out adapter kits. I'm currently seeking out a V6 truck so I can get a kit designed for it. I've made some minor changes to my adapter kit. I've seen the starter fail to properly engage in a couple different scenarios, so I've started including a new dust cover laser cut from galvanized steel, and a galvanized starter spacer. The dust cover will space your starter out the factory spacing from the flywheel, and the spacer will space it out another 0.1". Some aftermarket flywheels have needed additional spacing, which is why I've started including a spacer. Here are some shots of the new plate and dust cover:
Thanks for the interest,
Joe
Last edited by pyrojoe22; 02-04-2016 at 11:29 AM. Reason: Cleaning up the thread
Trending Topics
#11
Registered User
iTrader: (1)
Hmmmmmm If you have the patterns for both transmissions thats half the battle. I think there are engineering drawings available for almost any modern engine. Once the centerline is established it should be possible to mate almost any engine to W56 or R150. My thinking was the Honda H22A VTEC DOHC engine from a prelude(very popular w/ tuner community). It would open up a lot choices. Once you have each kit coded you let the CNC spit them out on an as sold basis, no inventory required.
Sounds like a lot of Fun!
Sounds like a lot of Fun!
#12
Registered User
iTrader: (1)
That is why you have the degree and I don't.
But it still is fun to create things that did not exist before, from nothing more than than slabs & rods of metal.
I'm glad you are having fun doing this, and I'm sure your customers are very happy you created the kits!
But it still is fun to create things that did not exist before, from nothing more than than slabs & rods of metal.
I'm glad you are having fun doing this, and I'm sure your customers are very happy you created the kits!
Last edited by skypilot; 04-03-2015 at 05:36 AM.
#14
That logo looks great! For me personally doesn't have to be fancy or detailed, just to be able to see contact info, maybe a few FAQ about shipping, payment, etc plus a product page to boot with a picture of two greatly influences my impression of the company in a good way.
Separate URL would be sweet, then you would start to show up in google results I believe?
Separate URL would be sweet, then you would start to show up in google results I believe?
#15
can you put the dimensions of the w56 in a picture or a cad file, I dont need the OM617 dimensions, I am not looking to make a OM617 conversion, I want to build a VW TDI conversion adapter for my truck but I cant find an accurate dimensions of the W56 trans belhousing, they all have been measured with a tape measure. I already have the TDI dimensions from a factory drawing and I just need the W56. Thanks
#17
Registered User
Thread Starter
My website is under construction, but I at least have it up with my contact info so you can get a hold of me to make orders, until I get the online store set up.
www.doomsdaydiesel.net
www.doomsdaydiesel.net
Last edited by pyrojoe22; 03-09-2017 at 09:40 AM.
#18
Registered User
iTrader: (1)
I have one of those bell housings. I paid $250 for it back some years ago not knowing for sure if I would use it. I'm not sure about demand but I imagine it would be easy to do since you already have the "numbers" for both ends. So I would put it out there and make them custom order, pre-paid basis. That way you are not carrying inventory, just a CAM file.
#19
Any plans for a TDI 2.0L to A340H auto that originally had a V6? The prices for the 16 valve 2.0L tdi's have been falling and in stock form, make decent power.
That is the swap I am considering.
Cheers
PJ
That is the swap I am considering.
Cheers
PJ