We have a brand new rear diff skid for Tacoma trucks 8.4" & 8.0" rear diff 1st & 2nd Gen


Pricing

325.00 + Shipping
PM me you E-mail and I will send over a invoice once the payment is made i will add your name to the list
Shipping charges are set via time zone PST 25.00 MT 35.00 CT 45.00 EST 50.00



A deposit of 150.00 is required to hold your place on the list. Once your order is placed and a is deposit received There will be a 20% restocking fee for all canceled orders. Skids will be shipped vie FedEx as numbered on the list 5 at a time so the wait time can be up to a month or more for the guys at the bottom of the list depending on the amount of orders there is in from of you. I will do my best to get these out ASAP (I am only one guy)

The key: Green Deposit received: Blue during the build: Orange Paid in full: Red shipped



The GB list
1. NYCO TRD Offroad + Shipping
2. Maticuno "8.4" + Shipping
3. MJonAgs32 "8.4"
4. sytfu510 "8.4"
5. wlmuncy "8.4"+ Shipping
6. Mudman 8.4" + shipping 3 extra stickers
7. HomerTaco + Shipping 8.4" 1 extra sticker
8. CoTacoTRD + Shipping TRD Offroad 1extra sticker
9. DOT + Shipping TRD Offroad
10. darkgreentaco TRD Offroad
11. Zlagger 8.4"
12. eachin 8.4
13. lrgrnr 8.4" TTORA
14. arrrghhh TRD Offroad
15. Manlaan TRD Offroad
16. Ryan626 TRD Offroad TTORA
17. nimrod712 + Shipping TRD Offroad 3 extra stickers TTORA
18. Enigmaaron 03 TRD Offroad
19. GeoTaco TRD Offroad
20. kmok + Shipping TRD Offroad
21. bones2blood002 TRD Offroad
22. Steve103 8.4" TTORA
23. fireturk41 8.4" 1 extra sticker
24. Armsmaster 8.4"
25. ag4892 8.4"
26. bjmoose 8.4"
27. sgl 8.4"
28. FixedTRD TRD Offroad
29. Tro1086 8.4" TTORA
30. 06rubi + Shipping TRD Offroad
31. mhuff29 8.4"
32. SCFirefighter + Shipping 8.4"
33. woods247 8.4" 2 extra stickers
34. Rebel Taco 22 04 TRD Offroad
35. csuviper TRD Offroad
36. Fox 21 Alpha TRD Offroad
37. pittim + 10.00 03 TRD Offroad
38. ProshopPB Land cruiser 9.25 TTORA

Additional Orders
1. dbronzo 8.4
2. w3tw0rks TRD Off road
3. markm2442 TRD Off road
4. Yep 1st Gen TRD
5. Tepidy + Shipping 8.4
6.
7.
8.
9.
10.

Specs

1/4" plate steel CNC cut formed on a press brake and fully welded. The design will allow me to only have 4 weld joints on the whole skid shell (not including the mounts) all the rest will be bent steel plate for Optimal strength. The design also has Pinion protection
(NOTE) if you have axle wrap I don't recommend pinion protection because it will contact your drive line when your axle wraps.

The mounts are 1" DOM tube for the font lowers with welded bung and the top plate is 1/2" plate with 3/4" DOM tube welded to each side with two 3.5" grade 8 bolts providing a full lock around the front of the 3rd. the axle tube mounts are 1/2" plate CNC cut and formed to the axle and 3/4" DOM welded at the ends for the top clamp secured with two 2.5"x1/2" grade 8 bolts and locking nuts.


Skids will be shipped as shown in the photos with one coat of self etching primer. If you plan on powder coating your skid let me know and I will not prime it.






The axle clamps are side specific there will be a D and a P on the top clamps they will not fit if you switch them.



















Disclaimer
These skids are for off road use only and are not DOT approved please obey local laws and regulations.

 

Looks good dude!

Free

Fink

 

Thanks man just to let everyone know these skids will work on all toyota 8.0 & 8.4 rear axles. I'm just checking to see if modifications need to me made to the mounting points for linked rear axles.

 

20 confirmed price is set at 225.00+ Shipping


19 Confirmed from TW alone and I anticipate more. This GB is on TW, Here & TTORA so just a few orders from TTORA and YotaTech and the shipping will be 10.00 flat

 

I mocked up the front lower mounts last night here are a few cell phone shots.

The top plate in the picture is just a jig for tube placement. The top plate will be 1/2" plate across the top wrapping the 3rd with 3/4" .120 wall tubes welded to each end where two 3" long 1/2" grade 8 bolts will bolt into the lower mounts. I wont have the bungs until the end of the week but this gives you guys an idea.


There is a rest under the 3rd that raps the lower to aid in clamping you can't really see it in the picture if you look closely you can see the weld joint. Its 1/4" now for mocking but will be 1/2" plate for the final product. Note the tube used for mocking these is HREW the finial product will be all DOM tubing.


These 1" .120 wall tubes will have a weld in threaded bung for a 1/2" grade 8 bolt to clamp the 3rd.

 

Beefy!!!!!!!!!!!!!! Bump!!

 

Thanks man but why don't i see your name on the list

 

cuz i have a job that pays almost nothing

 

does that inclue the stuff from Blue torch Fab too?

 

From his ttora thread... "no."

 

No it doesn't but you can buy the DIY kit from them for 59 bucks it's well worth it.

 

TTT one more week guys!

 

TTT updated pics with some design changes.