I found some 33x12.5 Geolander MT tires for cheap and want to throw them on. I have a 2nd gen with 2inch lift springs and just torsion bar cranked, will these fit? Anyone have this size tire and lift? Could you show some pics...

 

ya they should fit fine

 

correct me if i am wrong but most 2nd gens came with 31's. With the lift there shouldnt be any issues

 

what is the back spacing on your wheels?

 

they'll fit

 

As with all things tire:

Put tires on.

Flex.

Sawzall to fit.

All done. No rub.

 

At ride height, you should be ok. BUt when flexing it may rub.

A little trimming may be in order.

 

What Deathrunner said - I have them on mine but I also have a 1.5'' body lift to go with the 2'' suspension lift.

I had to move the front bumper forward about an inch and I have removed the lower part of the bumper. On full lock they rub the mud flaps - I really should get off my ar5e and cut them.

 

x2

At least a little beating of the pinchweld and trimming will be required to not rub when flexed and turning.

 

it would be a whole lot of cool, until u have to turn

 

bump stop spacers. no problem

 

33"x12.5" Hercules Durango MT's, factory 15"x7 rims, Zero lift does rub.



This is only because I needed new tires... I do have a 4" lift waiting to go on...