Offroad Tech Discussion pertaining to additions or questions which improve off-road ability, recovery and safety, such as suspension, body lifts, lockers etc
Sponsored by:
Sponsored by:

Modification Wisdom: Is Less More?

Old May 20, 2008 | 02:46 PM
  #1  
AppleJack's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 560
Likes: 0
From: Medford, Oregon
Modification Wisdom: Is Less More?

I have modified several different vehicles since I caught the wheeling bug. I realized that experience has changed my modifying methods from "Go Big" to "Only What's Necessary".
I used to feel the need to run at least 35's, but now only run 32's. I still get down the same trails and and haven't broken anything on this truck yet.
I went wheeling down some trails to the Illinois river this weekend and ran into a group of Jeeps and Sami's, all heavily modified. Not to sound arrogant but, they were impressed that I made it down despite my long(ish) wheelbase and "small" tires. I did have to winch once, going up and out but, no problem. Then I caught back up to their group and had to wait 3 hours behind them because one Sami rolling on 36's broke a rear axle.
The incident just made me think. Yeah I may have to winch a little more here and there but, I've learned that sometimes these tall tired rides aren't so dependable. I've been there and I hated it. I say all that to say this: Sometimes something you think is gonna be "all that", just aint, and it's cheaper, less frustrating, and more reliable to build according to your needs. If you need 35's or larger, fine. However, I think that most of the time you could get by with less tire and less wear and tear on your rig, if you focused on other areas of your rig, such as a winch, sliders, or locking differentials.
Reply
Old May 20, 2008 | 03:07 PM
  #2  
norcalsvx's Avatar
Registered User
 
Joined: Aug 2006
Posts: 2,122
Likes: 2
From: GRASS valley, CA
check this out 28" tires and it wheels

https://www.yotatech.com/forums/f86/...y-28-s-104077/
Reply
Old May 20, 2008 | 03:08 PM
  #3  
CJM's Avatar
CJM
Registered User
 
Joined: Aug 2006
Posts: 4,940
Likes: 2
From: Central NJ
I always felt that 33's were where you should be. Combinded that with a 2-3" suspension lift and a 1-2" body lift and your good to go. Add some lockers and junk and you can outwheel most built rigs if you know what your doing.

I never saw a need to go 35's, while they gain you 2" in height they arent really needed.
Reply
Old May 20, 2008 | 07:12 PM
  #4  
4rnr's Avatar
Registered User
20 Year Member
 
Joined: Sep 2004
Posts: 1,515
Likes: 0
From: Plainfield, IL
This is a natural cycle, though I usually hear it from the guys who keep going and going until they have a buggy. Typically the next step is a PU on 35's, due to the fun and simplicity. you are just experiencing it on a smaller level.

that will be 100$ and get off my couch.
Reply
Old May 20, 2008 | 07:41 PM
  #5  
norcalsvx's Avatar
Registered User
 
Joined: Aug 2006
Posts: 2,122
Likes: 2
From: GRASS valley, CA
there are a few places out in the sierra's that i wish i had some 35" and a front arb but that's only on a few spots
Reply
Old May 21, 2008 | 03:00 AM
  #6  
tc's Avatar
tc
Contributing Member
 
Joined: Nov 2005
Posts: 8,875
Likes: 3
From: Longmont, CO
amen brother ...

33's with lockers front/rear and I can guarantee you that the capability of the rig is not what limits me ...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
buckz6319
86-95 Trucks & 4Runners
23
Aug 5, 2017 03:50 AM
Badfish740
86-95 Trucks & 4Runners
4
Sep 4, 2015 04:21 AM
DiggnDeep
84-85 Trucks & 4Runners
4
Sep 3, 2015 02:45 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:43 PM.