I have bought some extended shackles, I am wondering if I need any other mods to fit them.

My truck is 2" lifted shocks and springs, but I want to get that bit extra out of it.

How easy are shackles to fit, and will I need any other parts installed to get them to work, brake lines etc?

Thanks guys

 

]


well dont u already have a SAS? are you using stock shackles? what is your spring set up?

 

Shackle installation tips:
- http://www.4crawler.com/4x4/ForSale/...l#Installation

May need to add a shim to the axle to correct the pinion angle, depending on shackle length and drive shaft type:
- http://www.4crawler.com/4x4/ForSale/...es.shtml#FAQ12

Measure for the shocks and brake lines, etc. See if any of them are getting pulled tight at full droop. If so, replace with something longer.

 

Thanks for the replies..

The springs I have are leafs, already 2" lifted with standard shackles.

The shackles I have bought are 155mm from end bolt to end bolt