Yep:
- http://www.4crawler.com/4x4/CheapTri...larCrossmember

You can see where mine rubbed below:


Scraped the grease fitting off the first time on a ~1200 mile trip and the CV was toast by the time I got home.

 

I ended up just getting my rear shaft shortened with heavy wall tubing and I dont have any vibrations even at 70

 

I just started having interference after adding a cage to the rear of my 4Runner. It gets worse when I added alot of camping gear in the back. I'm just going to clearance the horsecollar crossmember enough so the CV doesn't rub. I've got some major rubbage going on.