ARB Taco Bullbar install
Jan 30, 2007 | 01:57 PM
#1
Thread Starter
Registered User
Joined: Jan 2005
Posts: 575
Likes: 0
From: Vancouver, British Columbia
ARB Taco Bullbar install
Snaped a couple quick shots of my new install!! PIAA 525 Dual-beam Aux lights mounted (better pics will follow)
This is a ARB bullbar for a Tacoma, smaller then the Padro bullbar, fits closer to the front of the truck and its a few inches narrower>
This is a ARB bullbar for a Tacoma, smaller then the Padro bullbar, fits closer to the front of the truck and its a few inches narrower>
Last edited by 97Limited; Jan 30, 2007 at 02:01 PM.
Jan 31, 2007 | 07:11 AM
#7
Thread Starter
Registered User
Joined: Jan 2005
Posts: 575
Likes: 0
From: Vancouver, British Columbia
Thanks guys, I really like how much smaller this bumper is, The Pado bar just sticks out alittle too far for my like'n!!
These wheels are the 16x8 American Racing Ventura's, just had them Powercoated flat black.
It bolts right in, Just have to remove the Frame horns, grind the flange of the horns flush with the frame rails, bolts into stock tow hook locations, and just have to drill two 1/2" holes thru the bottom of rails for a pair of bolts! All work took me 1.5hr by myself, just need a hand slide'n the new bumper into place.
It bolts right in, Just have to remove the Frame horns, grind the flange of the horns flush with the frame rails, bolts into stock tow hook locations, and just have to drill two 1/2" holes thru the bottom of rails for a pair of bolts! All work took me 1.5hr by myself, just need a hand slide'n the new bumper into place.
Last edited by 97Limited; Jan 31, 2007 at 07:21 AM.
Trending Topics
Feb 1, 2007 | 08:38 AM
#10
Contributing Member
Joined: Dec 2005
Posts: 1,427
Likes: 0
From: vansterdam BC.
awesome jesse! now lets go out n put some dents & scratches in that bad boy! 
did you paint your grille trim too? looks flat black in the pics but cant really tell. lets get get some rear bumpers made! im thinking of incorporating joe's (miller on bc4x4) help in getting one setup for me. i've go templates & measurements already. all i need is some steel & someone to cut & weld it up...
did you paint your grille trim too? looks flat black in the pics but cant really tell. lets get get some rear bumpers made! im thinking of incorporating joe's (miller on bc4x4) help in getting one setup for me. i've go templates & measurements already. all i need is some steel & someone to cut & weld it up...
Feb 2, 2007 | 07:46 AM
#11
Thread Starter
Registered User
Joined: Jan 2005
Posts: 575
Likes: 0
From: Vancouver, British Columbia
awesome jesse! now lets go out n put some dents & scratches in that bad boy!
did you paint your grille trim too? looks flat black in the pics but cant really tell. lets get get some rear bumpers made! im thinking of incorporating joe's (miller on bc4x4) help in getting one setup for me. i've go templates & measurements already. all i need is some steel & someone to cut & weld it up...
did you paint your grille trim too? looks flat black in the pics but cant really tell. lets get get some rear bumpers made! im thinking of incorporating joe's (miller on bc4x4) help in getting one setup for me. i've go templates & measurements already. all i need is some steel & someone to cut & weld it up...
Snaped these after some of the fog cleared>
PIAA 525 Daul-Beam lights>
A shot of how close the bumper sits to the body>
Last edited by 97Limited; Feb 2, 2007 at 07:47 AM.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
1
Sep 17, 2015 06:14 PM
ripp96
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 31, 2015 11:14 AM
ripp96
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 25, 2015 02:32 PM
