ARB Bumper and Warn winch
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Lodi, Ca
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
ARB Bumper and Warn winch
Ok guys, I ve done some searching but did not find what I was looking for.
I have an ARB bullbar and just purchased a Warn winch for it.
Well My question is for you folks who have installed a winch in your ARB bumper.
"Where does your clutch lever end up being?"
As I see it mine will be towards the back of the winch and I will have to reach in to the bumper to access it.
Does this sound right?
I have an ARB bullbar and just purchased a Warn winch for it.
Well My question is for you folks who have installed a winch in your ARB bumper.
"Where does your clutch lever end up being?"
As I see it mine will be towards the back of the winch and I will have to reach in to the bumper to access it.
Does this sound right?
#3
Contributing Member
Join Date: Oct 2002
Location: Duvall, WA
Posts: 5,089
Likes: 0
Received 0 Likes
on
0 Posts
Part of the install is to unbolt the clutch housing on the winch and rotate it so that the actuator lever is accessible via the hole in the front of the bumper.
In this picture,
Just to the right of the fairlead, you can see the lever through the access hole, right next to the P.A. speaker.
In this picture,
Just to the right of the fairlead, you can see the lever through the access hole, right next to the P.A. speaker.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
06-13-2022 07:40 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
09-05-2015 06:52 PM
FS[PacNorWest]: 1993 4 Runner, V6, 4wd, Auto,
AkitaDog
Vehicles - Trailers (Complete)
0
09-03-2015 09:01 PM