Toyota Fiberglass: 1983 Trekker Build-Up Thread
Jan 20, 2009 | 04:34 PM
#362
Thread Starter
Joined: Jan 2006
Posts: 6,382
Likes: 302
From: BC Canada
thanks ..guys ..
I think an open mind is best .. I dont have to "use the info suggested" , but I always listen ..
pretty sure I'm goin' RED .. almost a candy red , but it's a base/clear .
I'm going to have a vid cam with me on the inital start up .. so I will post it for you guys !!! ..
.
I think an open mind is best .. I dont have to "use the info suggested" , but I always listen ..
pretty sure I'm goin' RED .. almost a candy red , but it's a base/clear .
I'm going to have a vid cam with me on the inital start up .. so I will post it for you guys !!! ..
.
Jan 20, 2009 | 05:58 PM
#363
Registered User
Joined: Aug 2007
Posts: 872
Likes: 1
From: Reno, NV
Read every post. Great progress. Lots of jealous people watching you build this old B4Runner.
I like red. The redder the better, but kinda partial to the crimson side of red.
We gotta know if it starts first crank and runs. (pressure filled expectations).
The motor says "NO OIL", so don't forget. Hate to see you ruin it...
Good Luck,
Phil
I like red. The redder the better, but kinda partial to the crimson side of red.
We gotta know if it starts first crank and runs. (pressure filled expectations).
The motor says "NO OIL", so don't forget. Hate to see you ruin it...
Good Luck,
Phil
Jan 21, 2009 | 09:12 PM
#365
Thread Starter
Joined: Jan 2006
Posts: 6,382
Likes: 302
From: BC Canada
worked on wiring tonight ...
ignition is identified and wired >
signal harness /83 > wires identified
wiper harness identified
just need to get the 6G positive ... and wire it to the box .. and we'll have ignition !!!
ignition is identified and wired >
signal harness /83 > wires identified
wiper harness identified
just need to get the 6G positive ... and wire it to the box .. and we'll have ignition !!!
Jan 25, 2009 | 04:28 PM
#368
Thread Starter
Joined: Jan 2006
Posts: 6,382
Likes: 302
From: BC Canada
progress has been slow as of late .. My shop is going threw some growing pains , so not much getting done threw out the week ..
but this weekend , I was back at er' ..
getting everything labled .. it's comming !!
also , checking the fuse box on the drivers kick panel .. and there really isnt much room ...
so I'm going to build a specific box or "french" the fuse box
.
but this weekend , I was back at er' ..
getting everything labled .. it's comming !!
also , checking the fuse box on the drivers kick panel .. and there really isnt much room ...
so I'm going to build a specific box or "french" the fuse box
.
Jan 26, 2009 | 05:41 PM
#373
Registered User
Joined: Dec 2005
Posts: 2,024
Likes: 6
From: Souderton, PA
Jan 27, 2009 | 06:19 AM
#374
Thread Starter
Joined: Jan 2006
Posts: 6,382
Likes: 302
From: BC Canada
I wonder where this guy is gonna put his? he says he has leg room but with a honda v-6 mounted in his cab, I don't see how
Corey I seriously hate to think of you selling this thing...whoever ends up with it had better appreciate the time etc you put into it...at least they will have all the work documents...
as with everything , it is for sale "for the right price" . At this point and time if someone were to "purchace" they would even have there choice of exterior color , interior color and fabric , even the sterio .. I'm wanting to further expand my business , and limit my "borrowing" amount . so If it sells , the funds will finance some wanted equiptment , to "ramp" up for some VERY cool new pieces .
dont ask , cuz I'm not going to start posting the price I want , If you have to ask you cant afford it !!
.
!!! initiate the laaaayyy zer !!!
