Yakima Roof Rack w/ Pics
#1
Contributing Member
Thread Starter
Join Date: Jun 2003
Location: SoCal
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
Yakima Roof Rack w/ Pics
Hi all,
After my poll and much consideration I decided to go the Yakima route for my roof rack solution. I have a few Yakima products already and their customer and warranty service is second to none.
I purchased a Yakima LoadWarrior on e-bay, then went to cheaphondaparts.com to get the best price on just about everything else. Click here for their Yakima Selection They also feature $12.50 shipping on the whole order which is huge with the potential shipping costs on this kind of stuff. In retrospect, I should have bought the basket there too, since it would have only cost me about $10 more than the e-Bay price once shipping was considered. The Yakima LoadWarrior can also be mounted to the factory rack, though I do not think it is nearly as sturdy as the Landing Pad-Control Tower set-up. Plus, with the Control Towers, you can take the whole rack off of the truck in less than 30 seconds if you need to.
Here is my setup:
Landing Pad 1 (2 Sets) #00221(to attach the towers to the factory roof rack tracks)
Control Towers #00214 (to attach the Crossbars to the Landing Pads)
48” HD Crossbars #00408
Locking Bracket #07064 (Locks the basket to the bars)
LoadWarrior Basket #07070
LoadWarrior Extension #07074
LoadWarrior Stretch Net #07072
SK Lock Cores – 12 Pack #07222 (to have all my Yakima stuff keyed alike)
A Few Pics from the weekend, some even have the Rack in them…
Waking up to Snow at Walker Pass. This is where the Pacific Crest Trail crosses 178 near Lake Isabella, CA -Saturday 11/1/03
The Rack covered in Snow
Near Piute Peak between Lake Isabella and Jawbone Station
Descending Geringer Grade into Kelso Valley
After my poll and much consideration I decided to go the Yakima route for my roof rack solution. I have a few Yakima products already and their customer and warranty service is second to none.
I purchased a Yakima LoadWarrior on e-bay, then went to cheaphondaparts.com to get the best price on just about everything else. Click here for their Yakima Selection They also feature $12.50 shipping on the whole order which is huge with the potential shipping costs on this kind of stuff. In retrospect, I should have bought the basket there too, since it would have only cost me about $10 more than the e-Bay price once shipping was considered. The Yakima LoadWarrior can also be mounted to the factory rack, though I do not think it is nearly as sturdy as the Landing Pad-Control Tower set-up. Plus, with the Control Towers, you can take the whole rack off of the truck in less than 30 seconds if you need to.
Here is my setup:
Landing Pad 1 (2 Sets) #00221(to attach the towers to the factory roof rack tracks)
Control Towers #00214 (to attach the Crossbars to the Landing Pads)
48” HD Crossbars #00408
Locking Bracket #07064 (Locks the basket to the bars)
LoadWarrior Basket #07070
LoadWarrior Extension #07074
LoadWarrior Stretch Net #07072
SK Lock Cores – 12 Pack #07222 (to have all my Yakima stuff keyed alike)
A Few Pics from the weekend, some even have the Rack in them…
Waking up to Snow at Walker Pass. This is where the Pacific Crest Trail crosses 178 near Lake Isabella, CA -Saturday 11/1/03
The Rack covered in Snow
Near Piute Peak between Lake Isabella and Jawbone Station
Descending Geringer Grade into Kelso Valley
#4
Registered User
Join Date: Mar 2003
Location: Ann Arbor, MI
Posts: 2,785
Likes: 0
Received 0 Likes
on
0 Posts
hey so did your truck not come with the factory rails? Did it have just those two black strips on both sides? Would you be able to take a close up shot of how it is attached to your roof?
Because all mine did was come with 2 black strips on both sides, no tracks or anything. I was wondering if something could lock up to those.
Btw, looks really nice.
edit: Ok I just re-read your post, you have tracks, I don't :cry:
Because all mine did was come with 2 black strips on both sides, no tracks or anything. I was wondering if something could lock up to those.
Btw, looks really nice.
edit: Ok I just re-read your post, you have tracks, I don't :cry:
Last edited by Toyo_Runner96; 11-04-2003 at 04:34 AM.
#5
Hey, looks good.
Those are very good prices too on Yakima gear.
I really dig my Load Warrior.
They just recently came out with that Hi-Lift acc., but I like the way my Hi-Lift mounts better.
It's less weight on the rack itself, and the weight is distributed on the crossbars instead.
I have access to the Pacific Crest trail not to far from me.
If I start now, I could be down your way in a month to check out your rig
Those are very good prices too on Yakima gear.
I really dig my Load Warrior.
They just recently came out with that Hi-Lift acc., but I like the way my Hi-Lift mounts better.
It's less weight on the rack itself, and the weight is distributed on the crossbars instead.
I have access to the Pacific Crest trail not to far from me.
If I start now, I could be down your way in a month to check out your rig
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
06-13-2022 07:40 PM
JookUpVandetti
86-95 Trucks & 4Runners
6
09-11-2015 09:41 AM
priest16
84-85 Trucks & 4Runners (Build-Up Section)
15
08-06-2015 07:43 AM
defrag4
Vehicles - Trailers (Complete)
0
07-31-2015 10:50 AM