Yakima Rack on 2nd Gen
#1
Yakima Rack on 2nd Gen
Hey guys,
Sorry I haven't been on here in a while, but dial-up just sucks when trying to surf the forum. So, once I get back up to school on our network I will be checking in a lot more frequently.
Anyway, I am about to put a set of Yakima towers and cross-bars on my rig, and was just wondering if anyone had a picture of what the rack would look like. I know that the bars are going to be centered over my doors, but I would just like to see what someone's looks like before I throw mine up there. If possible, I would like to see one without a basket or anything like that attached on top (just the control towers and cross-bars).
Thanks so much fellas - I really appreciate it. Take care-
CTB
Sorry I haven't been on here in a while, but dial-up just sucks when trying to surf the forum. So, once I get back up to school on our network I will be checking in a lot more frequently.
Anyway, I am about to put a set of Yakima towers and cross-bars on my rig, and was just wondering if anyone had a picture of what the rack would look like. I know that the bars are going to be centered over my doors, but I would just like to see what someone's looks like before I throw mine up there. If possible, I would like to see one without a basket or anything like that attached on top (just the control towers and cross-bars).
Thanks so much fellas - I really appreciate it. Take care-
CTB
#2
Co-Founder/Administrator
iTrader: (1)
Joined: May 2002
Posts: 32,242
Likes: 21
From: Auburn, Washington
Hi Cody, many many pix here.
http://www.pnw4runners.com/tando/hilift_mount.htm
And a few close-ups here.
http://www.pnw4runners.com/runs/41203/4_12_2003.htm
Here's one that shows how they are centered over the doors.
http://www.pnw4runners.com/runs/41203/5.jpg
And yes, my Load Warrior is in about every pic, it's been on there shortly after I put the towers & bars on.
http://www.pnw4runners.com/tando/hilift_mount.htm
And a few close-ups here.
http://www.pnw4runners.com/runs/41203/4_12_2003.htm
Here's one that shows how they are centered over the doors.
http://www.pnw4runners.com/runs/41203/5.jpg
And yes, my Load Warrior is in about every pic, it's been on there shortly after I put the towers & bars on.
#3
Hey Corey,
Thanks for the pics. Unfortunately, when we tried to put my rack on today, we ran into a couple of problems. Apparently the towers that were given to me were old enough to be Y-Towers, not Q-Towers. Consequently, the Q-Clips that I bought did not fit (of course), and so I am basically at ground zero. All that I have that will carry over to the newer Q-Towers are the actual crossbars. So, I guess the factory rack will remain on there for a little while longer.
Now, to figure out how to attach my canoe to the factory rack.....
Thanks again Corey. I can't wait to be up at school and away from this dial-up access. I feel like I'm missing so much by not checking on the board every day. Don't leave me too far behind!!!!
Take care,
Cody
Thanks for the pics. Unfortunately, when we tried to put my rack on today, we ran into a couple of problems. Apparently the towers that were given to me were old enough to be Y-Towers, not Q-Towers. Consequently, the Q-Clips that I bought did not fit (of course), and so I am basically at ground zero. All that I have that will carry over to the newer Q-Towers are the actual crossbars. So, I guess the factory rack will remain on there for a little while longer.
Now, to figure out how to attach my canoe to the factory rack.....
Thanks again Corey. I can't wait to be up at school and away from this dial-up access. I feel like I'm missing so much by not checking on the board every day. Don't leave me too far behind!!!!
Take care,
Cody
#4
anybody know how much it would cost for a yakima rack where the front would be the Q towers that go on the doors and the back go in the factory runners? with the bars and everything? if anybody has any sort of idea that would be great.
Thanks
KEVIN
Thanks
KEVIN
#5
Co-Founder/Administrator
iTrader: (1)
Joined: May 2002
Posts: 32,242
Likes: 21
From: Auburn, Washington
Originally posted by CTB
Thanks again Corey. I can't wait to be up at school and away from this dial-up access. I feel like I'm missing so much by not checking on the board every day. Don't leave me too far behind!!!!
Take care,
Cody
Thanks again Corey. I can't wait to be up at school and away from this dial-up access. I feel like I'm missing so much by not checking on the board every day. Don't leave me too far behind!!!!
Take care,
Cody

I have cable, and when I get home at night, there are 110 new posts most of the time since I left for work.
We are averaging about 300 posts a day here, possibly more.
When it shows me 110 new posts, that doesn't take into account the other many replies within the post.
We could very well be up over 500 replies a day here :pat:
We are a very busy board indeed.
Good luck in rounding up the parts.
By the way, the crossbars I am using have been on all 3 of my Toys.
I got them in '88.
Tough buggers.
#6
Originally posted by KevyWevy
anybody know how much it would cost for a yakima rack where the front would be the Q towers that go on the doors and the back go in the factory runners? with the bars and everything? if anybody has any sort of idea that would be great.
Thanks
KEVIN
anybody know how much it would cost for a yakima rack where the front would be the Q towers that go on the doors and the back go in the factory runners? with the bars and everything? if anybody has any sort of idea that would be great.
Thanks
KEVIN
Trending Topics
#9
if you got an extra 2-5 hours a week heres another idea...go talk to a manager at REI...let him know how well you know the area and how much you camp and wheel and see if he will put you on the schedule one night a week for a few hours...dont get me wrong you dont make ANY money doing this...but the employee discount is ridiculous...on anything Yakima youll get 50% off !! if it says REI on it youll usually get more like 60-70% off...at the REI here most of the guys only work about 10 hours a month...strictly for the discount man...
#10
Co-Founder/Administrator
iTrader: (1)
Joined: May 2002
Posts: 32,242
Likes: 21
From: Auburn, Washington
No, the REI discount doesn't work that way.
If you are an REI employee, you get 30% off of any name brand item.
If it's an REI brand label such as their tents, clothes, sleeping bags, ect, an employee gets 50% off.
If you are an REI employee, you get 30% off of any name brand item.
If it's an REI brand label such as their tents, clothes, sleeping bags, ect, an employee gets 50% off.
#11
Originally posted by Corey
No, the REI discount doesn't work that way.
If you are an REI employee, you get 30% off of any name brand item.
If it's an REI brand label such as their tents, clothes, sleeping bags, ect, an employee gets 50% off.
No, the REI discount doesn't work that way.
If you are an REI employee, you get 30% off of any name brand item.
If it's an REI brand label such as their tents, clothes, sleeping bags, ect, an employee gets 50% off.
#13
not bad indeed...everytime i go in there and plunk down my AMEX card for the nice girl to swipe...i look over at the stack of applications on the counter and think i should do it...maybe ill swing by there today...??
#14
i've tried to get a job there before. they never even called me back
but now that i think of it, my friends sister works there. maybe i'll try and get her to hook me up. she did it for some mountain biking gloves. muhahahaha
but now that i think of it, my friends sister works there. maybe i'll try and get her to hook me up. she did it for some mountain biking gloves. muhahahaha
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
Jun 13, 2022 07:40 PM
runnermedic
95.5-2004 Tacomas & 96-2002 4Runners
13
Sep 21, 2015 05:20 PM
reallynotamechanic
86-95 Trucks & 4Runners
1
Sep 11, 2015 11:52 AM




