Wiring trailer lights???
#1
Wiring trailer lights???
My 2000 4Runner did not come with the towing package. However, I installed a hitch, now I need to hook up some wires. Can someone tell me where to find the wiring harness? Thanks,
Andy
Andy
#3
something like so
http://www.suspensionconnection.com/...scon/7277.html
http://www.suspensionconnection.com/...scon/7277.html
Last edited by Elton; Apr 4, 2010 at 11:36 AM.
#5
You should get some instructions with your purchase, but essentially you will be connecting to the wires behind your tail lights. You will have to move the sides of the back of the cargo area to access the tail lights. There is also a plastic piece you will have to cut underneath the weather stripping.
Pretty straight forward
Pretty straight forward
#7
Hey guys. I installed my trailer wiring and for the life of me I can't figure out how to run the wire to the outside of the car. I've just been running it out the back and shutting the backdoor over it. Can someone show me where to run the wire from inside to outside?
Trending Topics
#10
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
I just drilled a hole in the floor put a gromet in and sealed it up with blue silicone .
I also made up my own harness using plugs for the left tail light harness then just running a wire from the right turn signal to the plug harness.
I also used the 7 wire trailer cable as I needed the extra wires for the electric brakes
I also made up my own harness using plugs for the left tail light harness then just running a wire from the right turn signal to the plug harness.
I also used the 7 wire trailer cable as I needed the extra wires for the electric brakes
Thread
Thread Starter
Forum
Replies
Last Post
BeMiceElf
Misc Stuff (Vehicle Related)
7
Oct 10, 2015 09:40 PM
Johntom240
General Electrical & Lighting Related Topics
7
Jul 13, 2015 12:18 AM




