will a sitch fit here on the dash?
Mar 17, 2005 | 07:54 PM
#1
Thread Starter
Contributing Member
Joined: Sep 2002
Posts: 4,749
Likes: 0
From: Santa Clarita, California
will a switch fit here on the dash?
what's behind the highlighted part?
will a small switch fit in there? probably a rocker type.
how hard is it to access?
yeah yeah, typo on the thread title. sWitch. if a mod would be so kind to change it that'd be super fantastic.
Last edited by calrockx; Mar 17, 2005 at 07:55 PM.
Mar 17, 2005 | 08:11 PM
#4
Registered User
Joined: May 2002
Posts: 10,036
Likes: 5
From: Los Angeles
chuck,
i believe there is. best way of course to find out is to remove that bottom panel (four 10mm bolts).
assuming youre gonna use a factory cutout, the problem you might have is having that switch "grip" onto the hole you cut out. pull out one of your existing cutouts and you will see that the cutout itself has these "feet" that graps/snaps onto the dash part. the dash part has some plastic behind it that grips the feet.
chuck, you know this is my specialty so lets talk on AOL IM
bob
edit: if thats an alarm led on that cutout, i'd relocate it to the area where you are proposing to put the switch or some other area to free up that valuable cutout space
bob
i believe there is. best way of course to find out is to remove that bottom panel (four 10mm bolts).
assuming youre gonna use a factory cutout, the problem you might have is having that switch "grip" onto the hole you cut out. pull out one of your existing cutouts and you will see that the cutout itself has these "feet" that graps/snaps onto the dash part. the dash part has some plastic behind it that grips the feet.
chuck, you know this is my specialty so lets talk on AOL IM
bob
edit: if thats an alarm led on that cutout, i'd relocate it to the area where you are proposing to put the switch or some other area to free up that valuable cutout space
bob
Thread
Thread Starter
Forum
Replies
Last Post
klavender1
86-95 Trucks & 4Runners
7
Aug 15, 2015 01:51 PM
