95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Utimate 3rd gen?

Thread Tools
 
Search this Thread
 
Old Jan 27, 2006 | 10:56 PM
  #1  
Mr. Bob's Avatar
Thread Starter
Contributing Member
 
Joined: Dec 2005
Posts: 402
Likes: 0
From: Vancouver BC
Utimate 3rd gen?

Here is a good question I think... what would make up the ultimate 3rd gen runner??

I have been thinking and thinking about this, and have come up with what I think makes the ultimate 3rd gen:

Starting point:

Any year, 96-02, Im not picky about this one.... has to be a 3.4L has to be a 5 speed and has to have an E locker, 4.30 gears prefer.... In either Black, Green, or stellar blue

Mod list:

Engine:
SC kit and all the goodies that make it work properly and safe for the engine
Headers and 2.5" exhaust system
CAI

Suspension:
Ultimate, SAS and enough lift to clear 35s.... Gears front and rear ( 4.88s ) and a front locker

Second to that, Tundra coils and 2 top up spacers for front, FZJ-80 coils for rear, OME shocks, 1" - 2" BL to fit aprox 285/75/R16 sized tires on FZJ-80 rims, drop panhard bar, 1" diff drop, taco manual locking hub swap, Aussie locker in front. Also tundra brakes up front.

Exterior:

TJM T17 bumper
winch
Sliders
99+ headlights
01+ tail lights
Clear corners
Satoshi mod
Hood scoop
Hilux Surf emblem

Interior:

Good quality sound system, nice deck, great speakers all run off an amp, and a 10" sub.
GPS


I think that sums it up for me.... So what do you guys think "makes" the ultimate 3rd gen???

Cheers
Bob

Last edited by Mr. Bob; Jan 27, 2006 at 10:57 PM.
Reply
Old Jan 27, 2006 | 11:16 PM
  #2  
Localmotion's Avatar
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Filthyrich's rig is the ultimate 3rd gen...closely followed my mine..HAHAHA
Reply
Old Jan 27, 2006 | 11:59 PM
  #3  
garrett1478's Avatar
Banned
 
Joined: Jan 2005
Posts: 0
Likes: 0
to each his own.
Reply
Old Jan 28, 2006 | 04:49 AM
  #4  
JHupp's Avatar
Registered User
 
Joined: Oct 2005
Posts: 1,166
Likes: 0
From: New Jersey
If you want the stick it has to be 96-00, In '01 they stopped putting in the 5 speed. And I would check out SteveO's rig, the craziest I have seen so far.
Reply
Old Jan 28, 2006 | 05:34 AM
  #5  
FilthyRich's Avatar
Contributing Member
 
Joined: Jun 2004
Posts: 4,218
Likes: 0
From: Richmond, Va
Mr. Bob, sell all your parts and buy my truck.
Simple as pie
Reply
Old Jan 28, 2006 | 05:35 AM
  #6  
FilthyRich's Avatar
Contributing Member
 
Joined: Jun 2004
Posts: 4,218
Likes: 0
From: Richmond, Va
Originally Posted by Localmotion
Filthyrich's rig is the ultimate 3rd gen...
bamachem was my inspiration. His rig was on my desktop for I don't know how long
Reply
Old Jan 28, 2006 | 08:04 AM
  #7  
MTL_4runner's Avatar
Contributing Member
 
Joined: Jul 2003
Posts: 8,807
Likes: 3
From: Montreal, QC Canada
Originally Posted by FilthyRich
bamachem was my inspiration. His rig was on my desktop for I don't know how long
I agree.....I'd have to say Andy's (Bamachem) would hold the ultimate 3rd gen title right now.
Reply
Old Jan 28, 2006 | 08:43 AM
  #8  
ebelen1's Avatar
Contributing Member
 
Joined: Jul 2005
Posts: 1,963
Likes: 0
From: Socal
Originally Posted by MTL_4runner
I agree.....I'd have to say Andy's (Bamachem) would hold the ultimate 3rd gen title right now.
Dito. He invented the Tundra lift and even created his own rear tire carrier. Sheesh, he even painted parts of his truck himself...

Eric's is not far behind. You should just buy Eric's b/c by the time you make your own ultimate 3rd gen, you would have spent way more than Eric's asking price.
Reply
Old Jan 28, 2006 | 10:05 AM
  #9  
d0ubledown's Avatar
Contributing Member
 
Joined: Dec 2005
Posts: 1,427
Likes: 0
From: vansterdam BC.
saw this guy's (greg is his name i think) black 3rd gen, and i just about creamed. not sure if he is/was on this board, but his rig is insane. lotsa goodies put into this thing. apparently he sold it to some guy...lucky bastard i think his name was heh.



one more pic



rest of the pics are here


steve schaefers, filthy's, bamachems..lotsa other ones here that are also contenders...
Reply
Old Jan 28, 2006 | 12:48 PM
  #10  
HOJU's Avatar
Contributing Member
 
Joined: Feb 2004
Posts: 1,274
Likes: 0
From: UTAH
I've got the same bentup rear bumper, but with hitch...

Steve's, Andy's, and Eric's are all awesome rigs!
Reply
Old Jan 28, 2006 | 12:54 PM
  #11  
Macgyver's Avatar
Registered User
 
Joined: Aug 2002
Posts: 102
Likes: 1
I believe the guy above, Greg, was banned from this forum for being a piece of ˟˟˟˟˟. All I can say is that if I run into him on the trail I'm going to beat his a$$. Sorry ahout the hijack but those pics reminded me of him and I had to vent.

My only new years resolution for '06 was to finish up my 4Runner, then I'll have the ultimate 3rd gen.........just kidding

Last edited by Macgyver; Jan 28, 2006 at 01:09 PM.
Reply
Old Jan 28, 2006 | 01:06 PM
  #12  
BajaRunner's Avatar
Contributing Member
 
Joined: Apr 2004
Posts: 7,122
Likes: 6
From: 5th Gen San Diegan, California
Well all the solid axle 3rd gens are pretty gnarly...

www.sonoransteel.com and www.hunt4steve.com and cubuffs is awesome!
http://community.webshots.com/user/marck231

then there is another guy on Pirate with another green SA rig which has full coil-over rear.

Last edited by BajaRunner; Jan 28, 2006 at 01:10 PM.
Reply
Old Jan 28, 2006 | 01:14 PM
  #13  
calrockx's Avatar
Contributing Member
 
Joined: Sep 2002
Posts: 4,749
Likes: 0
From: Santa Clarita, California
i don't think there exists a 3rd gen currently that'd i'd call ultimate. but there are some nice ones with elements of such a rig. i'm talking black, sc 3.4, crawler, coilover sas, black beadlocked 37 mtrs, flat belly, double locked, diamond axle housings with some beefy shafts, internal roll cage, tundra brakes, satoshi'd , lightforce 240s, winched t15, etc.... that gives you an idea of my current "ultimate" 3rd gen
Reply
Old Jan 28, 2006 | 01:20 PM
  #14  
justinh's Avatar
Registered User
 
Joined: Sep 2002
Posts: 1,520
Likes: 1
From: woodstock, ga
Originally Posted by d0ubledown
saw this guy's (greg is his name i think) black 3rd gen, and i just about creamed. not sure if he is/was on this board, but his rig is insane. lotsa goodies put into this thing. apparently he sold it to some guy...lucky bastard i think his name was heh.



one more pic



rest of the pics are here


steve schaefers, filthy's, bamachems..lotsa other ones here that are also contenders...
that truck was rolled on the highway by the guy that bought it from Greg.
Reply
Old Jan 28, 2006 | 01:52 PM
  #15  
Cebby's Avatar
Registered User
 
Joined: Sep 2002
Posts: 11,199
Likes: 2
From: Pittsburgh, PA
Originally Posted by justinh
that truck was rolled on the highway by the guy that bought it from Greg.
Hope the guy didn't get hurt. If he didn't, that's pretty damn funny. Obviously bought someone who didn't know to drive a truck like a truck...

I especially like the wheel weights going halfway around the wheel...
Reply
Old Jan 28, 2006 | 02:29 PM
  #16  
EWAYota's Avatar
Contributing Member
 
Joined: Dec 2003
Posts: 4,586
Likes: 1
From: Richland, Washington
Originally Posted by Cebby
I especially like the wheel weights going halfway around the wheel...

Reply
Old Jan 28, 2006 | 02:40 PM
  #17  
rocket's Avatar
Contributing Member
iTrader: (1)
 
Joined: Apr 2005
Posts: 4,683
Likes: 0
From: Colorado
Utimate 3rd gen?

right here... https://www.yotatech.com/forums/show...highlight=flex



and... https://www.yotatech.com/forums/showthread.php?t=28738
Reply
Old Jan 28, 2006 | 02:41 PM
  #18  
Lone4runner's Avatar
Contributing Member
 
Joined: Dec 2004
Posts: 597
Likes: 0
From: Quincy, MA
funny thing was Filthy your truck was on my desktop for awhile then Bamachem's lol
Reply
Old Jan 28, 2006 | 02:46 PM
  #19  
Cebby's Avatar
Registered User
 
Joined: Sep 2002
Posts: 11,199
Likes: 2
From: Pittsburgh, PA
Originally Posted by Lone4runner
funny thing was Filthy your truck was on my desktop for awhile then Bamachem's lol
You must have a big desk...
Reply
Old Jan 28, 2006 | 02:50 PM
  #20  
rocket's Avatar
Contributing Member
iTrader: (1)
 
Joined: Apr 2005
Posts: 4,683
Likes: 0
From: Colorado
lol
Reply



All times are GMT -8. The time now is 08:01 PM.