Hello,

I am trying to remove my trailer hitch from my 1999 4runner. Problem is that I cant seem to find a way to disconnect the trailer wiring harness and don't want to cut the wires. Any one do this before? Any help is greatly appreciated. Thanks Edogg

 

I havent dont this, but perhaps you could coil it up and zip tie it to the frame rail.

 

mine has two little screws that screw into the hitch, then i zip tied it the frame

 

Yeup... Doink's got the idea...

The last time I was under there, I spent some quality time and am p[retty sure there wasn't a disconnect. Just coil up the wires and zip-tie -em out of the way.

 

can you take a pic of the mounting hardwares when you take them off? I bought mine used and didnt come with it. I want to see what bolts i need to buy, thanks.

 

you can send me the wiring harness :-)

 

Ok I found the two bolts holding the harness on but the bolts are sunk into the harness body. Any one have any advice on how to remove these bolts? Thanks Edogg

 

if i remember right, i had to push pretty hard to get a socket fit, but it does