Toyota factory e-locker 2001
#22
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mad Chemist
One more thing, then I'll shutup. If you plan on running bigger tires at some point, it might not be a bad time to regear at the same time as well. You could get two replacement diffs set up with new gears/arb lockers, and be done.
One more thing, then I'll shutup. If you plan on running bigger tires at some point, it might not be a bad time to regear at the same time as well. You could get two replacement diffs set up with new gears/arb lockers, and be done.
I have no idea what lift set up I am going to do yet and I really do not ever want to go above 33" on tires ( Infact, right now I am happy with 31"s..but I also have no lift yet) I only want to go to a max of 2.5" of lift
#23
Contributing Member
Join Date: Feb 2003
Location: Seattle, WA
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
I don't know, I'd probably go with the locker first, hands down that will give you the greatest increase in off-road performance. Getting a lift with bigger tires, will give you a bit more clearance underneath, but will also be a big cosmetic change as well, looks pretty darn cool after the lift.
You'll be able to fit 33's with 2.5-3" of lift with little or no rubbing after a little bit of work on the fender wells, nothing serious. A few of us run 33's (285's) without regearing the diffs, but you'll definitely notice the difference, the engine works harder to turn those big rubbers. Its not unbearable though, you just get used to it. The 4runner wasn't meant to be much of a speed demon. I would suggest installing a transmission cooler (not a bad idea, even if you don't go to bigger tires) for around $60.00 to keep the tranny from overheating if you go to bigger tires but keep the gearing the same. I would only regear if you were going to do both ARB lockers at the same time- to get it all done in one shot. Keisur, another yotatech member, went this route, going to dual arbs and new gears. I think RT is running 285's with stock gearing, he can chime in here as well.
You'll be able to fit 33's with 2.5-3" of lift with little or no rubbing after a little bit of work on the fender wells, nothing serious. A few of us run 33's (285's) without regearing the diffs, but you'll definitely notice the difference, the engine works harder to turn those big rubbers. Its not unbearable though, you just get used to it. The 4runner wasn't meant to be much of a speed demon. I would suggest installing a transmission cooler (not a bad idea, even if you don't go to bigger tires) for around $60.00 to keep the tranny from overheating if you go to bigger tires but keep the gearing the same. I would only regear if you were going to do both ARB lockers at the same time- to get it all done in one shot. Keisur, another yotatech member, went this route, going to dual arbs and new gears. I think RT is running 285's with stock gearing, he can chime in here as well.
Last edited by Mad Chemist; 01-09-2004 at 10:12 AM.
#24
Contributing Member
Join Date: May 2002
Location: NY
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mad Chemist
I agree, just some added stress and tire wear, but not a colossal crisis by any means.
I agree, just some added stress and tire wear, but not a colossal crisis by any means.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
skoti89
Offroad Tech
3
07-08-2015 12:05 AM