Nope, no fancy Bunny shield skidplate. Just the wabbit curb feelers.

 

I got my ARB Bumper delivered Monday. It was wedged standing on end in the entryway of my house. It was strapped to a smashed pallet with a single strand of plastic strapping.....LOL

Shipped via Central Freight Lines

The Hellas were wedged in with the bumper and miraculously survived

* I checked the box with the 2000 parts and all seems to be
there.

* I got a Chicago Electric 4.5" Angle Grinder and some cutting
disks last weekend.

* I found my 1/2" drill bits and am ready to install this weekend.

Last night I assembled the ARB turn signals just to get the small stuff done and out of the way. It would be nice to find a better set of these that are the same size and dimensions as the ARBs.

I looked over the wiring to my stock turn signals and noticed an extra unused cable with a plug strapped to the turn signal wire bundle on each side. Is that for the factory Fogs which I don't have on my Runner??

For the Hellas I went out and got a 6 gang fuse box,10 gauge wire, and a mini fuse blade holder to come off of the battery. This way I'll be set for any other future Mods.

 

I am looking for a TJM T-17 or T-15 for a 1997 4Runner SR5. Which bumpers will work for my application? I have heard that some taco applications work well on 3rd gen runners. Secondly, where on this planet do you buy a TJM?

 

www.sonoransteel.com

 

Jason Burtman of burtman industries sells both ARBs and TJMs.

Great guy by the way!