I just purchased a set of manual hubs off e-bay for my 89 4X4 w/IFS. Is there anything else I need to buy to install these or should this be everything I need? If there is something else, got a link to it please?

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT


Thanks!

Bryan

 

That should be it other than the gaskets....check these out
https://www.yotatech.com/~corey/tech...etal22lica.htm
http://www.4x4wire.com/toyota/maintenance/front_end/
I think one of the threads on 4x4 has the part numbers for the gaskets as well...it's not hard, but have fun with the cone washers. hose them down with some pb blaster ahead of time.

 

are you switching to manual hubs?

 

going from auto hubs? You'll want a set of standard wheel bearing nuts and the lock tab ring between them too.

 

Yes, that's the plan!

 

Any links to what exactly I need to order? Thanks.

 

10 bucks says you have ADD, not auto hubs. auto hubs look like a manual hub without a dial, and you need different spindle nuts or something like that to convert over. ADD is just a drive flange and a vacuum disconnect front end.

 

If it's just ADD, he doesn't need the nuts and locking washer. All he'll need is the gaskets and some anti-seize.

 

Are the gaskets something I could pick up at a store like Parts America?

 

pick them up from your local stealer....check those links I posted up top they should be a good read for you and also help for rebuilding later on

 

Yeah you'll probably only be able to get them from the dealer but you can try. Mine were a whopping $12.