^^ Those are not bad prices if the tube is 17 bucks - see if they have one instock to look at. The tube may need the ends trimmed up to fit but for $17 bucks I'd do it - like I said, I have already wasted $40 on muffler shop pipes that wouldnt work.

Get a look at the Ford pipe if you can and post the PN# if its the right size!

 

Yeah i just need to find the time to get down to the dealer and match the pic to the tube, when i have the chance i will go down there and take a look at it, and get some part numbers.

 

ask if the p/n would be the same for canada. there is a ford dealer just around the corner from me, kind of funny, buying ford parts for a yota!

thanks,

lee

 

any updates on either part numbers or how if you are going to make some and sell them?

 

Ok guys, I'm not a noob, but this sounds like a stupid question to me
Is the "intake silencer" an actual part? And does the 22RE have one? If it's stupid, just kick me in the teeth now and spray dirt on my face with your M/T's

 

I work at a Ford dealer, and my cost for the boots are $30.00 a piece and the tube is more than that. That is why I am hunting for a good alternative to the blue boots I have. I just haven't had time to look. The tube is 3 inches in diameter. If anyone else has ideas let me know.

 

The heck with the boots!
I can get those at autozone cheap enough - how about the PN# for the 3" Ford tube?

 

When I was in autozone the other day I went through the ricer section and noticed they had a chrome air pipe that was 3" and had a boot on one and was made to have the filter on the other end. What I'm wondering if anyone has tryed one of the these and hooked it to the afm, possibly needing a little cutting, and a good boot. Also it does have the 90o fitting's. So if anyone has used or tryed this let me know, if not I'll do a write up and take some pics, because i'm going to try it this weekend........forgot to add I had one made at a muffler shop and it looked horrible and leaked around the 90o's

 

When you guys are making these usless things keep in mind that the TB is 2.75" I tried using 3" radiator hose initially and it leaked you need a 2.75" to 3" hump hose connection. I have run mine both with the custom intake tube and the stock one and I can honestly say there is no difference. Im stuck with my intake tube for now since I mounted my jacobs coil under it and cannot go back to stock. I will be making a new tube with more bends in it to make checking the oil easier.

If you think you are gaining anything just have a look at the AFM opening and think again. I guess they look like they should make more power huh?

 

If all we need it a 3" pipe that is smooth, check out www.ebay.com and type in the search field honda civic intake you should be able to pick one up for about 15-20 bucks max

 

ya this pipe at the zone is like 20, also ive seen they make the adaptor plate for the afm to put a filter on, just haven't seen one for the yoter, but I know you can get that on ebay.

 

So is there anyone making a "production" version of this mod yet? I've torn the intake boot and would gladly do this mod rather than pay stealership prices for a replacement.

Ed

 

http://www.toyboxfab.com/cart/index.php?productID=184

 

sweet! defently added to my xmas wish list

 

I'm going to be working on one for the 3.4L too.. hopefully should have it ready in about 2 weeks.

 

...
Intake Silencer Removal...

Which one would have been shorter to type & help someone out?

 

That's exactly what I'm looking for. It's a little more expensive the the stock replacement, but I may get it, anyways. Thanks.

Ed

 

No problem. The prices also include s/h in the lower 48 states.

 

Gosh... $75... That's alot...

 

It is.. but it isn't considering all the materials, labor, and shipping is included in the price. I'll set up a group buy if there is enough people interested, the price will be lowered substantially too.