OME & 285's on. (Pics)
#1
OME & 285's on. (Pics)
Ordered up the kit from Toytec. 881's & top out spacer up front, 891's on the back.





Below: close... but they cleared the control arm even at extension.

Below: Got the diff drop on there too; woulda been real bad without it.

Below: The alignment was way off so I got that fixed up.

Still need to get extended rear shocks and ome fronts eventually ($$). Also, extended rear brake line and e-brake bracket... I will need that stuff based on what I saw during the install process.
I'm real happy with it so far.





Below: close... but they cleared the control arm even at extension.

Below: Got the diff drop on there too; woulda been real bad without it.

Below: The alignment was way off so I got that fixed up.

Still need to get extended rear shocks and ome fronts eventually ($$). Also, extended rear brake line and e-brake bracket... I will need that stuff based on what I saw during the install process.
I'm real happy with it so far.
#3
Looking Really Nice There!
Question.
I was looking on the Toytec site.
IIRC the OME setup didn't come with the diff drop?
Did you order that separate?
And if so, did you just do an inch of drop?
Also a little more curious, since I may now be considering this lift...
By any chance do you have a pic of the top out spacers on?
Just curious to see how it looks.
Thanks again for answering the questions, like I said, I am becoming more and more interested in doing this lift.
Question.
I was looking on the Toytec site.
IIRC the OME setup didn't come with the diff drop?
Did you order that separate?
And if so, did you just do an inch of drop?
Also a little more curious, since I may now be considering this lift...
By any chance do you have a pic of the top out spacers on?
Just curious to see how it looks.
Thanks again for answering the questions, like I said, I am becoming more and more interested in doing this lift.
#6
Looking Really Nice There!
Question.
I was looking on the Toytec site.
IIRC the OME setup didn't come with the diff drop?
Did you order that separate?
And if so, did you just do an inch of drop?
Also a little more curious, since I may now be considering this lift...
By any chance do you have a pic of the top out spacers on?
Just curious to see how it looks.
Thanks again for answering the questions, like I said, I am becoming more and more interested in doing this lift.
Question.
I was looking on the Toytec site.
IIRC the OME setup didn't come with the diff drop?
Did you order that separate?
And if so, did you just do an inch of drop?
Also a little more curious, since I may now be considering this lift...
By any chance do you have a pic of the top out spacers on?
Just curious to see how it looks.
Thanks again for answering the questions, like I said, I am becoming more and more interested in doing this lift.
Glad you guys like, thanks for the comments.
-Luke-
Trending Topics
#11
#14
I know some guys at a lincoln/mercury dealership service department and went through their supplier, General Tire I beleive. The guys I know at the dealer did the mount and balance for me... I owe em' a case of beer on that one.
#20
Had a chance to put the lift and tires to the test yesterday and was very impressed with the performance. So were the jeep guys that I had to pull out of the same hole I cruised through.
They were runnin 33's too but got hung up on the front axle.
Thread
Thread Starter
Forum
Replies
Last Post
94 Newbie
95.5-2004 Tacomas & 96-2002 4Runners
3
Aug 6, 2015 10:33 AM
4Runnin2000
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 29, 2015 06:09 PM
MTLroadierunner
86-95 Trucks & 4Runners
1
Jul 20, 2015 03:07 PM
crashburnoveride
86-95 Trucks & 4Runners
1
Jul 10, 2015 06:39 AM





