Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Octane Difference

Thread Tools
 
Search this Thread
 
Old 04-11-2004, 10:30 PM
  #21  
Registered User
 
EDGE's Avatar
 
Join Date: Jan 2003
Location: outside NYC
Posts: 2,035
Likes: 0
Received 1 Like on 1 Post
on www.t4r.org plenty of threads on octane, almost all the guys V6 or V8 are using 87 or regular, I've tried 93 but it just burns more and I don't notice a performance gain.

What did you sell the Legend for, my friend had 2 similar cars a Legend and a Vigor, both mint totalled in a flood, how many miles did it have
Old 04-12-2004, 02:45 PM
  #22  
Registered User
Thread Starter
 
91bulldog's Avatar
 
Join Date: Oct 2003
Location: NY
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by EDGE
on www.t4r.org plenty of threads on octane, almost all the guys V6 or V8 are using 87 or regular, I've tried 93 but it just burns more and I don't notice a performance gain.

What did you sell the Legend for, my friend had 2 similar cars a Legend and a Vigor, both mint totalled in a flood, how many miles did it have
well, i sell the legend for many reasons...its a 91 car but only had 92k mileage on it. even w/ the low mileage the car still has problems. And Legends are not a cheap car to fix..Legend coupes still have some kind of value so i sold it.
Old 04-12-2004, 11:24 PM
  #23  
Registered User
 
EDGE's Avatar
 
Join Date: Jan 2003
Location: outside NYC
Posts: 2,035
Likes: 0
Received 1 Like on 1 Post
Good move
Old 04-13-2004, 01:55 PM
  #24  
Registered User
 
MossyRocks's Avatar
 
Join Date: Mar 2004
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
If the motor isn't timed for 93 then dont use 93. With higher octane gas the timing has to be advanced. higher octane gas is lit more by compression rather than spark, for example diesel gas can be 130 octane or so and diesels ignite by compression not spark. My wrx runs on 110 leaded now. I can run 93 in it but 28psi out of a 56 trim turbo with 9:1 pistons would blow it all to pieces. I have a knock sensor with a display and with 93 i get a knock at 15psi but with 110 I dont unitl 28.
Old 04-13-2004, 05:11 PM
  #25  
Registered User
 
Join Date: Jun 2002
Location: Lawrence, Ks
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
hold the phone. I was taught that if your motor pings to run a higher octane, seeing as the ping is a detonation, and keep running higher until it stops. Then back off for one tank to make sure you don't have to pay the extra .10 a gal. Like with HO motors 'Ex. vette' the manual says to run 91(in Dallas). otherwise detonation is likely. All of ya'll are saying the opposite. Am I backwards in my thinking? It says here http://www.prime-mover.org/Engines/G...es/octane.html that diesel is around 15 to 25 octane.

oh yeah, and I don't notice the power gains of 91 but I do see better MPG

Last edited by 2k-c; 04-13-2004 at 05:15 PM.
Old 04-13-2004, 05:25 PM
  #26  
Registered User
 
notaco's Avatar
 
Join Date: Jul 2003
Location: Ft. Collins, CO
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
I recently changed my fuel pump and filter and ran a tank of premium with fuel treatment. I seemed to be getting better milage but oddly enough I got the same 13.5 as the previous tank with regular. As far as build up in the chambers, just redline it and burn it out... maybe the reason for 13mpg.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Daenerysdad
Offroad Tech
2
10-01-2015 07:33 PM
EatChipsNow
86-95 Trucks & 4Runners
8
09-09-2015 01:25 AM
LJR
General Electrical & Lighting Related Topics
1
09-05-2015 06:02 AM
viesail
86-95 Trucks & 4Runners
5
09-05-2015 04:23 AM
pplusent
86-95 Trucks & 4Runners
9
09-02-2015 11:56 PM



Quick Reply: Octane Difference



All times are GMT -8. The time now is 08:20 AM.