o2 censor check engine light
Jul 23, 2012 | 11:39 AM
#1
Thread Starter
Registered User
Joined: Mar 2009
Posts: 10
Likes: 0
From: Eatonville, WA
o2 censor check engine light
i have an 95.5 tacoma 2.7. this last weekend i removed the catalytic converter and welded in a cat delete pipe. now my check engine light is on. from what ive been told is that the o2 censor on the down side of the cat is just to identify that there is a cat. well theres not. so is there anyway to bypass that and turn the check engine light off?
Jul 26, 2012 | 03:07 PM
#3
Thread Starter
Registered User
Joined: Mar 2009
Posts: 10
Likes: 0
From: Eatonville, WA
yes i do have one. there is also an upstream o2 censor. so 2 all together. i was told by a friend to disconnect the battery and it should turn off. so i did and it turned off. but a few miles down the road it came back on.
Jul 26, 2012 | 05:15 PM
#4
Contributing Member
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
If your code is a P0420 this will turn off the CEL. http://www.urdusa.com/Electronics-Re...kvp6i7pdd47fl7
Or you could just put your cat back on
Or you could just put your cat back on
Last edited by mt_goat; Jul 27, 2012 at 04:00 AM.
Jul 26, 2012 | 10:06 PM
#5
Registered User
Joined: Feb 2007
Posts: 1,262
Likes: 4
From: New Jersey and Sao Paulo
If your code is a P0140 this will turn off the CEL. http://www.urdusa.com/Electronics-Re...kvp6i7pdd47fl7
Or you could just put your cat back on
Or you could just put your cat back on
Jul 27, 2012 | 04:02 AM
#6
Contributing Member
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
BTW I have a cat, but not a factory cat, and still need the sim.
Last edited by mt_goat; Jul 27, 2012 at 04:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
