Newly Lifted!
May 27, 2003 | 10:00 PM
#1
Thread Starter
Contributing Member
Joined: Apr 2003
Posts: 2,549
Likes: 0
From: Albuquerque, NM
Newly Lifted!
Well after much research and consideration, I did it! 
I lifted the 4runner. I used the ever popular OME 891's with N86's on the rear, and the, not so popular, Daystar 2.5" Poly spacers in the front with a revtek diff drop kit and poly bumpstops.
The installation took me about 6 hrs by myself in my driveway with handtools. I didn't think that was too bad.
I got about 2.25" in the front and 3" in the rear. I am happy with the results. Someday I will do the SAW's up front, but other mods must come first.
Check out some Lift Pictures
I lifted the 4runner. I used the ever popular OME 891's with N86's on the rear, and the, not so popular, Daystar 2.5" Poly spacers in the front with a revtek diff drop kit and poly bumpstops.
The installation took me about 6 hrs by myself in my driveway with handtools. I didn't think that was too bad.
I got about 2.25" in the front and 3" in the rear. I am happy with the results. Someday I will do the SAW's up front, but other mods must come first.
Check out some Lift Pictures
May 27, 2003 | 10:04 PM
#2
Contributing Member
Joined: Jun 2002
Posts: 1,031
Likes: 0
Sweet! Good deal. Silver Highlanders have a very high cool factor, especially when they're lifted. 
Maybe we will invite you to our jam after all!
And I take it the wife is camera shy?
Maybe we will invite you to our jam after all!
And I take it the wife is camera shy?
Last edited by Darren; May 27, 2003 at 10:06 PM.
May 27, 2003 | 10:11 PM
#3
Thread Starter
Contributing Member
Joined: Apr 2003
Posts: 2,549
Likes: 0
From: Albuquerque, NM
Thanks man!
Yah the wife is camera shy and wheelin' shy, hence she wouldn't let me continue up those steps. I'll go back without her
The daughter isn't camera shy or wheelin' shy, she actually likes to drive
she's only 2
I can't wait til CO4RJ!
Yah the wife is camera shy and wheelin' shy, hence she wouldn't let me continue up those steps. I'll go back without her
The daughter isn't camera shy or wheelin' shy, she actually likes to drive
she's only 2I can't wait til CO4RJ!
May 28, 2003 | 04:39 AM
#6
Contributing Member
Joined: May 2002
Posts: 5,278
Likes: 0
From: Tempe, Arizona
The front Daystar spacers are actually pretty clever, they split the load 1/2 in the pack and 1/2 out of the pack. Versus: Cornbred 100% in the pack and Revtek 80% in the pack and 20% out of the pack. Downey, All-Pro 100% out of the pack. The Daystar 50/50 should be nice......... for a spacer.
Oh by the way. If anyone is unhappy with ATS or thinks they were a "lame" or "cheesey" company. You should remove the arms and sell them. I have a long list of folks that would love to have them, I'm sure you could even make a profit, maybe actually buy a locker or something actually worth while. They are not required for mud boggin anyway.
Oh by the way. If anyone is unhappy with ATS or thinks they were a "lame" or "cheesey" company. You should remove the arms and sell them. I have a long list of folks that would love to have them, I'm sure you could even make a profit, maybe actually buy a locker or something actually worth while. They are not required for mud boggin anyway.
Trending Topics
May 28, 2003 | 09:19 AM
#13
Thread Starter
Contributing Member
Joined: Apr 2003
Posts: 2,549
Likes: 0
From: Albuquerque, NM
Chit Rod - Wheeler's
96 Runner - Thanks Man
Beachtaco - Thanks!
Loosehead - I was down past Sandia Labs on South Eubank, people call it "the ditch". It's like a wheelin' park. There are a lot of hill climbs and when it rains, mud. It's pretty fun.
Mad Chemist - Poly bump stops are softer than OEM they are also lower, I have yet to extend all the way though. Look at SSchaefer3's write up
Well I have to say thank you to all who post on Yotatech, I have learned a lot here. Oh yah...I caught yotatechitis too.
96 Runner - Thanks Man
Beachtaco - Thanks!
Loosehead - I was down past Sandia Labs on South Eubank, people call it "the ditch". It's like a wheelin' park. There are a lot of hill climbs and when it rains, mud. It's pretty fun.
Mad Chemist - Poly bump stops are softer than OEM they are also lower, I have yet to extend all the way though. Look at SSchaefer3's write up
Well I have to say thank you to all who post on Yotatech, I have learned a lot here. Oh yah...I caught yotatechitis too.
Last edited by Albuquerque Jim; May 28, 2003 at 09:20 AM.
May 28, 2003 | 02:02 PM
#20
Contributing Member
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally posted by RicNkc
looks awesome,,, i love the look without the running boards and the lifted look, im gonna take my runnboards offs, i hope the lil lady dont get to mad, lol....
looks awesome,,, i love the look without the running boards and the lifted look, im gonna take my runnboards offs, i hope the lil lady dont get to mad, lol....
