Never go to meineke if you want this to happen to your SAW
#42
Originally Posted by coloradobuffs
Sorry for the delay. I was drunk when I typed this thread. So get off my a$$. But, anyways here is what happen to my front SAW. http://community.webshots.com/user/jimbeamcu
Welcome to the board! As you can tell the guys on hear love to have fun but there is a wealth of information to be had here. HaveBlue has told many a story that has busted my gut and I have the messy monitor to prove it.Sorry to hear about your misfortune with Meineke and I hope they square it away with you with as little hassle as possible.
#43
Had a similar problem with NTB when I brought them my new Taco with 150 miles on it. I brought them 4 new Bilstein HDs (to replace the crap "toyota Bilsteins") and some 1" coil spacers to install and realign for a quoted price of $180. They said it took 3 of them (the big one on a long prybar) to get the fronts in. Next thing I know, all the grease is blowing out of my outer CV boot
When I brought it back, some moron from the shop stuck his head under it in the parking lot and says "defective boot!"
Got it on a lift and found that they had cut my boot with that prybar. It even made an impression on the band clamp on the boot @ the hub. The manager agreed to have the shaft rebuilt, as it may have been contaminated. I asked for toyota parts, but it looks like they just pulled a stock rebuilt unit from whatever service they use for halfshafts. I hope they didn't put junk boots and joints on it. Then there was the time I left the dealership with a Snapon cordless impact and no waterpump belt under the hood of our Camry-but that's another story. Seems like most times I've paid someone else to work on a vehicle, they screw something up
. Do it yourself if you can
When I brought it back, some moron from the shop stuck his head under it in the parking lot and says "defective boot!"
Got it on a lift and found that they had cut my boot with that prybar. It even made an impression on the band clamp on the boot @ the hub. The manager agreed to have the shaft rebuilt, as it may have been contaminated. I asked for toyota parts, but it looks like they just pulled a stock rebuilt unit from whatever service they use for halfshafts. I hope they didn't put junk boots and joints on it. Then there was the time I left the dealership with a Snapon cordless impact and no waterpump belt under the hood of our Camry-but that's another story. Seems like most times I've paid someone else to work on a vehicle, they screw something up
. Do it yourself if you can
#46
I'm glad to hear that they are fixing it at no cost. I guess you learned an easy lesson at someone elses exense this time.
It could've been you with the pipewrench in your hand.

Doug M.
It could've been you with the pipewrench in your hand.

Doug M.
#47
Originally Posted by rwmorrisonjr
Great one Alan, another fine HaveBlue interpretation! Just remember, he chose to go to CU-Boulder instead of a real scholl that has academic standards & entrance requirements.
#48
#49
Originally Posted by SolidDigital
#50
Who cares?
This is one thread out of how many thousands?
This doesn't classify how this YT community acts as a whole, just how a small group acts. If they want to take this thread and automatically assume that the whole place is like this then I will take a look at their thread and automatically assume that their forum is so dull that they have to look elsewhere for their laughs.
Is this true? Of course not!
Simply put...
Who cares?
This is one thread out of how many thousands?
This doesn't classify how this YT community acts as a whole, just how a small group acts. If they want to take this thread and automatically assume that the whole place is like this then I will take a look at their thread and automatically assume that their forum is so dull that they have to look elsewhere for their laughs.
Is this true? Of course not!
Simply put...
Who cares?
#52
Originally Posted by Poopshute
Oh f'n great... now we have some other forum talking crap about us. Wonderful.
"I humbly and graciously accept this recognition. I would like to thank family for giving me the gift of a sense of humor. I would like to thank my teachers for teaching me how to write a complete sentence. And I would especially like to thank the moderators for not banning me or placing this thread in a black hole. YOU LIKE ME! YOU REALLY LIKE ME!!!"
#53
Originally Posted by HaveBlue
"I humbly and graciously accept this recognition. I would like to thank family for giving me the gift of a sense of humor. I would like to thank my teachers for teaching me how to write a complete sentence. And I would especially like to thank the moderators for not banning me or placing this thread in a black hole. YOU LIKE ME! YOU REALLY LIKE ME!!!"
You forgot to thank GOD
#54
If they were to rebuild the sway away, would it ride like new. Is there anything bad about having the shock rebuilt by replacing the shaft and seal. Would it be better to have a brand new one rather than the rebuilt shock. Thanks for your help.
Thread
Thread Starter
Forum
Replies
Last Post
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
Nov 10, 2015 06:54 AM
zombie_barbarossa
95.5-2004 Tacomas & 96-2002 4Runners
3
Oct 2, 2015 10:54 PM
creecher10
86-95 Trucks & 4Runners
1
Sep 30, 2015 03:27 PM




