My High Idle... CURED!!!
#25
Same thing!
I have the same thing happening on my 3rz, but the rubbing is on the side toward the front of the truck. So the washer only makes it worse. How can I push it back and keep it back?
The following users liked this post:
22kiddoo (01-22-2020)
#26
Registered User
I have the same issue with a 3RZ-fe 07 Tacoma. post head gasket replacement... Im gonna try that washer thing, also my 94 truck (3VZ) has a high idle issue when placing in P, I have to kick it down.
#27
Registered User
I had a high idle situation a few years back on my '99 3RZ.
But it was caused by an improper re-install of the throttle cable.
There was no slack in the cable, at the throttle.
I adjusted in a little slack and all was good..
But it was caused by an improper re-install of the throttle cable.
There was no slack in the cable, at the throttle.
I adjusted in a little slack and all was good..
Thread
Thread Starter
Forum
Replies
Last Post
Longbed 90
86-95 Trucks & 4Runners
22
03-11-2019 12:38 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM