I was wanting an estimate on getting my crank turned and putting in new rod and main bearings. Im pulling the motor myself but I was just wanting an estimate on what a machine shop would charge. I have a 91 4runner with the 3.0 v6.

 

Prices will vary around the country. I was 4wheeling into Montana once, had to get the frame welded on a truck. Stopped at a truck stop, and the hourly rate for work was only slightly more than I made per hour (little shop along I-90).

My buddy paid 85 to 100 to get the 3.0 crank turned here near Seattle. Bought NAPA bearings.
With the problems Toyota had with the origonal HG, and all the engineering they did to redesign them, I would only use the new Toyota HG. THEY LOOK AWSOME!