FZJ80 springs on 4runner
#201
Originally Posted by 2wheelBLACKOUT
Are there anybody running these coils as a front set up.? how about both front and rear..?
Front FJ80 coils=rear of 3rd gen ('96-'02)
Rear FJ80 coils=rear of 2nd gen ('90-'95)
#202
Originally Posted by dragr1
I don't have pics but maybe I could take some Friday or maybe tomorrow. After looking at the OME's on the 4Runner and these, I'm pretty sure they're gonna have too much lift for me.
Chris
#205
Gerdo, you should probably either:
A) start reading this thread from the beginning or
B) search for answers to your questions
i suggest both, because there are MANY options to lift your 4Runner. lucky for you, it has been narrowed down to one main setup, http://sonoransteel.com/recommend.html
A) start reading this thread from the beginning or
B) search for answers to your questions
i suggest both, because there are MANY options to lift your 4Runner. lucky for you, it has been narrowed down to one main setup, http://sonoransteel.com/recommend.html
#206
Originally Posted by dragr1
I don't have pics but maybe I could take some Friday or maybe tomorrow. After looking at the OME's on the 4Runner and these, I'm pretty sure they're gonna have too much lift for me.
Chris these are about 21" tall standing on the ground and the color code is:
blue+pink+white
gray+orange+white
By my really rough and crude tape measurements, these would have to compress about 6.5" when installed to be where I want to be-I don't think it's gonna happen.
#207
Originally Posted by dragr1
Chris these are about 21" tall standing on the ground and the color code is:
blue+pink+white
gray+orange+white
By my really rough and crude tape measurements, these would have to compress about 6.5" when installed to be where I want to be-I don't think it's gonna happen.
blue+pink+white
gray+orange+white
By my really rough and crude tape measurements, these would have to compress about 6.5" when installed to be where I want to be-I don't think it's gonna happen.
Chris
#208
Originally Posted by ravencr
That seems longer than the 7 wraps. Are you sure their 7 wraps and not 8? What year were they from again?
Chris
Chris
No, I'm sure that they are 8 wraps!
They are from a '91.
#209
Originally Posted by dragr1
No, I'm sure that they are 8 wraps!
They are from a '91.
They are from a '91.
Chris
#210
hmm... i was hoping yours were 97 b/c then there might be SOME sort of pattern. it still seems like its jumping around. the one factor could be steel rear bumper vs. stock. are jayson (loosehead) and jim the only ones so far that are satisfied? i think it'll help when calrockx gets his in, bc his are from a 94 but have 7 coils. the weird thing is, brian had 96 coils, and got more lift than jim with 95 and loosehead with 97. this is all too confusing 
heres a table i've been keeping up with, add/edit your information:
Brett's junkyard find..1991......8 coils......approx 21"
Bamachem...............1993.......125k........way too much........8 coils
RTDawgs.................1993.....................( probably same as andy)
KevyWevy...............1993....................... .........................8 coils
calrockx..................1994.................... ............................7 coils
Albuquerque Jim........1995.......114k........3.25"........... .................
Brian.......................1996.................. ...>4"..............................
KevyWevy...............1996....................... .........................8 coils
Loosehead...............1997.......140k........3.5 ".....................7 coils
garrett1478.............1997.......144k........... ........................7 coils

heres a table i've been keeping up with, add/edit your information:
Brett's junkyard find..1991......8 coils......approx 21"
Bamachem...............1993.......125k........way too much........8 coils
RTDawgs.................1993.....................( probably same as andy)
KevyWevy...............1993....................... .........................8 coils
calrockx..................1994.................... ............................7 coils
Albuquerque Jim........1995.......114k........3.25"........... .................
Brian.......................1996.................. ...>4"..............................
KevyWevy...............1996....................... .........................8 coils
Loosehead...............1997.......140k........3.5 ".....................7 coils
garrett1478.............1997.......144k........... ........................7 coils
Chris
#212
Alright, this is going to confuse the hell out of everybody. I purchased some springs today from raventai on IH8MUD. He's parting out a vehicle for Urban Cruisers out of Atlanta. The springs on that vehicle were already gone but after talking with him I learned that Urban Cruisers had lots of FJ80 front springs laying around. I met with him today and we measured and noted every spring and here we go (don't know the years):
The color codes are in order from the installed position bottom to top (the color dot nearest the flat end of the spring is last in this listing). Height was measured at the longest point (end of the wrap) from inside the spring.
(1) 21" Blue Pink White 9.25 wraps
(1) 21" Grey Orange White 9.25 wraps
(3) 20.25" Blue Yellow White 8.75 wraps-one of these is a confirmed LX450
(3) 19.5" Green Yellow White 8.25 wraps-one of these is a confirmed LX450
(1) 19.5" Purple Green White 8 wraps
(1) 19.25" Double Purple Dark Blue White 8 wraps
(1) 19" Double Pink Light Blue White 7.5 wraps
(1) 18.5" Double Pink Grey White 7.5 wraps
(1) 18 7/8" Orange Orange White 7.75 wraps
I bought (2) Double purple Light Blue White that are 19" and 7.5 wraps.
The 2 confirmed LX450 springs came off of the same vehicle. It isn't known if any of the others are LX450, most likely they are Landcruiser. We also looked on Raven's stock LX450 and it had a green yellow white on the passenger side and a blue yellow white on the drivers side.
It is also interesting that on the 2 longest springs at 21" the colored dots were roughly twice the size of the dots on the other springs (1" vs 0.5"). The last thing to note is that the gas tank is on the drivers side of all 80's and all 80 front axles have a raised 1" or so plate where the drivers side front spring mounts to the axle (not raised on the passenger side).
This may confuse the crap out of everyone, but if you're interested in any of these springs then contact raventai over on www.IH8MUD.com or post in this thread:
http://forum.ih8mud.com/showthread.php?t=68102
The color codes are in order from the installed position bottom to top (the color dot nearest the flat end of the spring is last in this listing). Height was measured at the longest point (end of the wrap) from inside the spring.
(1) 21" Blue Pink White 9.25 wraps
(1) 21" Grey Orange White 9.25 wraps
(3) 20.25" Blue Yellow White 8.75 wraps-one of these is a confirmed LX450
(3) 19.5" Green Yellow White 8.25 wraps-one of these is a confirmed LX450
(1) 19.5" Purple Green White 8 wraps
(1) 19.25" Double Purple Dark Blue White 8 wraps
(1) 19" Double Pink Light Blue White 7.5 wraps
(1) 18.5" Double Pink Grey White 7.5 wraps
(1) 18 7/8" Orange Orange White 7.75 wraps
I bought (2) Double purple Light Blue White that are 19" and 7.5 wraps.
The 2 confirmed LX450 springs came off of the same vehicle. It isn't known if any of the others are LX450, most likely they are Landcruiser. We also looked on Raven's stock LX450 and it had a green yellow white on the passenger side and a blue yellow white on the drivers side.
It is also interesting that on the 2 longest springs at 21" the colored dots were roughly twice the size of the dots on the other springs (1" vs 0.5"). The last thing to note is that the gas tank is on the drivers side of all 80's and all 80 front axles have a raised 1" or so plate where the drivers side front spring mounts to the axle (not raised on the passenger side).
This may confuse the crap out of everyone, but if you're interested in any of these springs then contact raventai over on www.IH8MUD.com or post in this thread:
http://forum.ih8mud.com/showthread.php?t=68102
#213
Originally Posted by dragr1
I bought (2) Double purple Light Blue White that are 19" and 7.5 wraps.
in the quote above, did you mean to say double PINK light blue white??
Last edited by garrett1478; Dec 3, 2005 at 07:29 PM.
#214
Originally Posted by garrett1478
first of all, thanks for finding out all that info, thats really gonna help.
in the quote above, did you mean to say double PINK light blue white??
in the quote above, did you mean to say double PINK light blue white??
Nope, double purple is what I took. It's really hard to tell the pink from a faded purple, but the ones I have are definitely purple.
#216
Originally Posted by garrett1478
oh, ok, i didn't realize what you bought that was part of the list, i thought you were saying you bought a certain one from the above list and it wasn't even there, but i get it now.
Oops, sorry. The ones I bought are not on the list, the list is what he has left.
#217
Dragr1
Thank you for going through these springs with me, I had no idea there were this many diffrent kinds of OEM 80 series coils, at mud we dont really talk about or really pay much attension to stock springs it has been an education.
I hope the springs work out well for you.
Thank you for going through these springs with me, I had no idea there were this many diffrent kinds of OEM 80 series coils, at mud we dont really talk about or really pay much attension to stock springs it has been an education.
I hope the springs work out well for you.
Last edited by RavenTai; Dec 3, 2005 at 08:55 PM.
#218
I've got a pair of springs that came off a 94 Landcruiser.
One spring is a Double Purple Dark Blue White (19").
The other is a Double Purple Light Blue White (18.5").
I hope this info is useful.
One spring is a Double Purple Dark Blue White (19").
The other is a Double Purple Light Blue White (18.5").
I hope this info is useful.
#220
Originally Posted by SC4Runner
Mine are :
(1) 21" Blue Pink White 9.25 wraps
(1) 21" Grey Orange White 9.25 wraps
(1) 21" Blue Pink White 9.25 wraps
(1) 21" Grey Orange White 9.25 wraps
Also, what did you do with your brake linkages and lines to extend them?
Chris


