i wouldn't doubt it. they were from a 93 w/ about 135k on them and had 8 wraps.

here they are next to my 3.5/2.5 Downey Lift Coils...

 

Wow, those actually look like they could be 9 wraps if you count the top part. So, a 1993? Interesting info. It appears that the 1997 and 1993's are pretty long, but this picture actually seems to be the longest I've seen.

Chris

 

Why do you say the 97? Two people have them and they only have 7 wraps.

 

I didn't know that. Keggo claims his 1997 has 8 wraps and have provided at 4" of lift.

Chris

 

keggo uses rear coils...

 

I didn't know that! He must be one of only a few doing that, I guess.

Chris

 

no,He has a 2nd gen. second gens use the rear coils of a lc-80 to lift there rigs

 

And i dont think the rear coils of a LC ever had 8 wraps...I might be wrong

 

Here's a couple of pictures. I tried to measure but my pavement is really uneven...(My rear came out to be like 4 inches higher)

Need to get some good offroad pictures hah.




And a pretty RAINBOW!! JUS FOR JOO!

 

GOOD NEWS!
Originally Posted by Bighead
Have the 7-wrap coils finally been narrowed down to the 95 FZJ80?



Yes, double verified.

 

1995 Toyota FZJ-80 Land Cruiser Coils (Yes the front FZJ-80 coils fit in the back of a 3rd Gen 4Runner):
48131-6A570 - left - Orange + Orange + White
48131-6A480 - right - Purple + Gray + White

 

sc4runner: your truck is obscene...SOO TALL

 

Does anyone have pictures of these 1995 springs side by side? I'm interested to see if the left side has got an extra wrap?

Chris

 

80's on the left OME 891's on the right



Looks like an extra 1/2 wrap to me.

 

I'm assuming it fits fine, but with the extra wrap it appears that it might not jive with the stock lower notch on the axle. The only reason I say this is because if you look at the other springs on the right, that additional 1/2 of wrap doesn't exist.

Has anyone run into this fitment issue at all? I'm assuming not, since so many have done it, but I was just making sure it fits well at the bottom.

Chris

 

Has anyone measured the height (length) of the FJ80 springs? I found a pair locally today from a 1991 (Manufactured March of 1990) and of course they have 8 spring wraps. They feel pretty soft (I can compress them a couple of inches by hand) so I'm wondering if they have sagged some since they are 15.5 years old? I was thinking of trying them anyway, but I just wondered if anyone has measure their springs off the truck? Stock spring length? OME 891 length?

 

Do you have pics of them by any chance?

Chris

 

I don't have pics but maybe I could take some Friday or maybe tomorrow. After looking at the OME's on the 4Runner and these, I'm pretty sure they're gonna have too much lift for me.

 

I dont think this really applies to you, but I used a set off a 91 fj to raise the rear of my 2nd gen. I believe they measured about 19-20" (could be wrong about that....been a few months) and ended up lifting my rear about 4" from sagging.

 

Are there anybody running these coils as a front set up.? how about both front and rear..?