AT Fluid Leak?
#1
AT Fluid Leak?
Hey guys,
I noticed a leak this past weekend and it looks like AT Fluid (Reddish). I flushed the tranny about 1 year ago and applied The Right Stuff for the gasket and hasnt been an issue.
I tried to narrow down the source of the leak, it doesnt look like its coming from the gasket on the tranmission pan or tranmission pan bolt for sure. But it looks like its coming from the front of the pan where it meets the engine?
Any ideas?
I noticed a leak this past weekend and it looks like AT Fluid (Reddish). I flushed the tranny about 1 year ago and applied The Right Stuff for the gasket and hasnt been an issue.
I tried to narrow down the source of the leak, it doesnt look like its coming from the gasket on the tranmission pan or tranmission pan bolt for sure. But it looks like its coming from the front of the pan where it meets the engine?
Any ideas?
#5
OK,
I think I found the source of the leak. HELP!

Other pics here: http://picasaweb.google.com/vytruong/4runner#
I cleaned up the oil and let the car sit. Noticed oil build up here. I made sure it wasnt just a collection point so I cleaned up all around and it looks like its leaking from this little point in the bell. Once I started the car, it seemed to make the leak quicker. It doesnt look like an easy fix at all..any ideas? Is there a gasket between the bell and the metel plate that screwed into it?
I think I found the source of the leak. HELP!
Other pics here: http://picasaweb.google.com/vytruong/4runner#
I cleaned up the oil and let the car sit. Noticed oil build up here. I made sure it wasnt just a collection point so I cleaned up all around and it looks like its leaking from this little point in the bell. Once I started the car, it seemed to make the leak quicker. It doesnt look like an easy fix at all..any ideas? Is there a gasket between the bell and the metel plate that screwed into it?
Last edited by vtruong1; Jun 15, 2010 at 10:22 AM.
#6
No, there's no gasket. You can get a way better idea if you take off that "peek plate"
That bottom cover that you have pictured above can be easily removed (4 bolts IIRC)
Look in there and see if its dry. Its either the input shaft seal or something's up with your torque converter
Definitely need to drop the tranny if its one of those though
That bottom cover that you have pictured above can be easily removed (4 bolts IIRC)
Look in there and see if its dry. Its either the input shaft seal or something's up with your torque converter
Definitely need to drop the tranny if its one of those though
Trending Topics
#10
I personally have had this problem if it makes you feel better lol but heres a pic of your trans. The only 2 possibilities is the input shaft seal & front retainer gasket, or you're torque converter (unlikely but possible)
Thread
Thread Starter
Forum
Replies
Last Post
he's gone
95.5-2004 Tacomas & 96-2002 4Runners
7
Dec 3, 2019 07:08 AM
jasonty
Pre 84 Trucks (Build-Up Section)
41
Dec 23, 2018 01:00 PM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 16, 2015 06:20 AM




