The locker project is nearing completion. Yesterday, Mike and I put the electric locker third member in. It took from 8:30AM until about 5:30, with a 1 hour lunch break to pull the axle out, perform the drilling/welding/tapping, and then put the axle back in. I haven't been able to test it much, since I haven't re-geared my front yet. The 4.56 gears are a noticeable improvement over stock. I'd guess that once I put 33's on, it'll drive like the stock gears w/32's (which isn't bad at all).

Now, all that's left is the front gears/truetrac, and I have to finally install the CB spacers and ATS A-arms.

 

sweet.

haha my friend had 4.56 gears in his blazer with 35s. dont think he lost any power.. you should run better than stock with 32's, even once you get the 33's on. want to sell your old tires? i need some. acually im serious, let me know

 

Which ones are you interested in? My stock 265/70R16 Goodyear RT/S, or my current 265/75R16 Goodyear MT/Rs?

 

possibly the 265/75 MT's

 

Phong, good news indeed. Glad to hear all went smooth.

 

Congrats on your success. I think that this is the coolest mod you can do on an unlocked Toy.