CB Wire into cab???
Dec 19, 2002 | 09:42 PM
#1
Thread Starter
Registered User
Joined: Dec 2002
Posts: 80
Likes: 0
From: Langley BC, Canada
CB Wire into cab???
How do I get my CB radio wire from my antenna to the inside of the truck? I've looked along the wall and i cant really see anything... any ideas?
I have a 91 4runner by the way.... with a hood mount
I have a 91 4runner by the way.... with a hood mount
Dec 20, 2002 | 04:59 AM
#2
Contributing Member
Joined: May 2002
Posts: 4,267
Likes: 1
From: Solano Co, CA Originally a North Idaho Hick
If you are talking about the firewall there is a rubber boot on the drivers side that goes straight through to the inside and comes out right by your clutch. I ran my amp and Hella wiring through there. Here's a pic of the boot
I used a screwdriver to make the hole then fed the wire through.. easy!
I used a screwdriver to make the hole then fed the wire through.. easy!
Last edited by UKMyers; Dec 20, 2002 at 05:02 AM.
Dec 20, 2002 | 07:42 AM
#3
Contributing Member
Joined: May 2002
Posts: 6,033
Likes: 3
From: Wandering around Phoenix
In addition to the firewall grommet, there is a grommet under each of the front seats. I poked a hole through one of them and fed the cable from the rear bumper to the CB.
Steve
Steve
Dec 20, 2002 | 08:10 AM
#4
Registered User
Joined: Oct 2002
Posts: 913
Likes: 0
From: bellflower
Originally posted by Robinhood150
In addition to the firewall grommet, there is a grommet under each of the front seats. I poked a hole through one of them and fed the cable from the rear bumper to the CB.
Steve
In addition to the firewall grommet, there is a grommet under each of the front seats. I poked a hole through one of them and fed the cable from the rear bumper to the CB.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
WTB[MidAtl]: WTB: 89-95 radio brackets/standard cab carpet 2wd
mtb_taco
Items Wanted
0
Jul 15, 2015 08:36 AM
Johntom240
General Electrical & Lighting Related Topics
7
Jul 13, 2015 12:18 AM
