ARB locker install problems
#1
Registered User
Thread Starter
ARB locker install problems
I was trying to put in the locker today but I cut one of the o-rings so it'll wait till tomorrow morning. It's fairly easy (now that I know how to) to install except for the o-ring part. You have to be very careful not to cut it. I was able to find some o-rings from ACE hardware and for everybody's benefit, the o-ring size is 1 7/8 O.D., 1 3/4 I.D., 1/16 thick. I'll post some pics tomorrow. By the way, I couldn't find a dial indicator so we just went by the "prussian blue" tooth contact pattern test. Hopefully, everything will go as planned tomorrow.
George
George
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM