I'm looking to get an air intake and found a few on Ebay...which one is a better one?

Toyota 99-04 Tacoma 99-02 4Runner 3.4L V6 Air Intake
http://cgi.ebay.com/ebaymotors/ws/eB...5283494&rd=1,1 $99 + $30 for Shipping

http://cgi.ebay.com/ebaymotors/ws/eB...6888214&rd=1,1 $99 Free shipping

http://cgi.ebay.com/ebaymotors/ws/eB...4505027&rd=1,1 $48.95 + $25 for Shipping

 

AIRaid MIT and TrueFlow drop-in. Proven results. Done.

 

Brian,

you got the link where I can check the price and get the parts?

 

Just do a search on Froogle. I think you should be able to find the MIT for $100, and the filter for about $35.

Don't forget to do the deckplate mod too, it's just fun!

 

Agreed!

 

deckplate mod trueflow filter and isr mod best mods and cheap

 

but if you have the money to waste go with the airaid mit

 

I just was looking at the same intakes! Avoid the no name ones on ebay and get a brand name one, preferably with a poly hose. Metal tubes don't dissipate heat and allow hotter air into the engine, which defeats the purpose of the intake in the first place. And, a lot of the no name intakes are a pain to install because of lower quality parts...been there, done that!

The Vollant kit is nice, but expensive. K&N's kit is cheaper but doesn't enclose the filter element. I bought an S&B cold air intake on ebay for $199 with free shipping. It has the poly tube and a filter element enclosure. They're not very well known, but seem to be a superior intake system to most others on the market.

When I get my new S&B intake, I'll post up some pics and let you know what I think about it. IMO, spend the extra money for a name brand kit.

 

Don't bother with ebay, you can get all that stuff from Jason B and you don't have to worry about fakes or bad sellers.

Here's everything he's got for your 2001 4runner:
http://www.burtmanindustries.com/lis...om=0&t_step=61

This would be my first choice for an intake:
http://www.burtmanindustries.com/zoo...run_volant_3.4

This would be my second choice:
http://www.burtmanindustries.com/zoo..._truflo_int_96

Third choice:
http://www.burtmanindustries.com/zoo...n_airaid_96_02

If you want to do it cheap, just get one of these and do the ISR & deckplate mods:
http://www.burtmanindustries.com/zoo..._truflo_96u_v6

 

This is all correct.