'98 4Runner Headlights always on
#1
'98 4Runner Headlights always on
Hi
New to the forum, so I'll just introduce myself real quick. Bought my 4Runner in 2003 with 60k on it from the original owner, and its been a great vehicle. I do basic maintenance myself, along with all the regular fluid changes and it is running well today with 180k. Been reading and searching the posts for a while as a guest....alot of great information. Unfortunately, this morning, I got a reason to post.
Woke up and saw my headlights on. Irritated that I had left them on all night, I went outside to turn them off -- and they were off. Switch on and off the turn staulk did nothing. A couple questions:
-Any ideas what this could be besides a faulty turn signal switch? My plan is to buy one and change it out this weekend (I'm driving with the fuse removed now)
-Looking in the Haynes manual, they say you need to remove the steering wheel to get to the switch. A search in the forum claims otherwise -- just a couple of screws. Can someone clarify?
-Assuming I do have to take off the wheel, it seems pretty straight forward, with the exception of using a steering wheel puller. Is there a workaround, or do you really need that tool.
Thanks in advance for any advice.
Chris
New to the forum, so I'll just introduce myself real quick. Bought my 4Runner in 2003 with 60k on it from the original owner, and its been a great vehicle. I do basic maintenance myself, along with all the regular fluid changes and it is running well today with 180k. Been reading and searching the posts for a while as a guest....alot of great information. Unfortunately, this morning, I got a reason to post.
Woke up and saw my headlights on. Irritated that I had left them on all night, I went outside to turn them off -- and they were off. Switch on and off the turn staulk did nothing. A couple questions:
-Any ideas what this could be besides a faulty turn signal switch? My plan is to buy one and change it out this weekend (I'm driving with the fuse removed now)
-Looking in the Haynes manual, they say you need to remove the steering wheel to get to the switch. A search in the forum claims otherwise -- just a couple of screws. Can someone clarify?
-Assuming I do have to take off the wheel, it seems pretty straight forward, with the exception of using a steering wheel puller. Is there a workaround, or do you really need that tool.
Thanks in advance for any advice.
Chris
#2
What about a stuck relay? Sounds more like that then a bad switch. I had a bad relay on my foglights. I would come out and find the foglights on and the switch unresponsive. Tapping on the relay would shut them off. Replaced the relay and it fixed it.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
Oct 10, 2015 09:40 PM
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
rushw
General Electrical & Lighting Related Topics
4
Jul 18, 2015 01:46 PM
icentropy
86-95 Trucks & 4Runners
7
Jul 14, 2015 10:23 AM




