Ill4runner pics- http://www.toyota-4runner.org/photop...00&ppuser=8147

looks much better then I thought it would.


My car didnt come with a hitch but I really want to get one, does anyone sell a custom made one that fits 4runners with body lifts? I could prob redo it and weld it up but I dont trust my welding skills to tow anything.

Jeff

 

What's up?! Yep, I've got the 3" 4Crawler BL and a 3" Toytec OME lift running 33x12.50 SSRs on 16x8 wheels. Ride quality is great!

Here's a recent mud bog pic:



Here's another recent clean pic:

 

i was wondering when this thread was going to be revised, too many good pictures not to haha. anyways, thanks for stopping in ill, your rig is sweet

i'll update this again this weekend when i get done with the body lift and stuff

 

Did you get that body lift put on RooRunner?

 

matter of fact, i did!
https://www.yotatech.com/forums/f2/2...talled-120253/

day of, before bumper bracket mod









After bumper brackets were modded. Crappy cell phone pics

 

too bad i do not have a 4-runner, but here is my tacoma with that setup

 

roor your runner looks great! i finally did the herculine on my rocker panels and rear, i think it turned out good, thanks for the tips....and is that copper beech in the background of your last pic?

 

yeah actually hahaha

 

nice! im staying right over in statesboro place but i wish i was staying in copper beech

 

if anyone is still checkin out this thread i've been thinkin about putting 3 inch sonoran steel sus lift and 3inch 4crawler body lift in my 2000 4runner wondering if 35's will fit on my stock rims or any other suggestions to fit 35"s i've heard good and bad about body lifts not sure what to do

 

if anyone is still checkin out this thread i've been thinkin about putting 3 inch sonoran steel sus lift and 3inch 4crawler body lift in my 2000 4runner wondering if 35's will fit on my stock rims or any other suggestions to fit 35"s i've heard good and bad about body lifts not sure what to do

 

do i have to regear to run 35's was thinking about putting 3"bl and 3"sl in my 2000 4runner

any suggestions ??

 

best off with a wider wheel to fit 35X12.50 tires. Also if you have a V6 run 4.88's to turn 35's. But some leave in the stock gears.

 

3+3+33 =

[IMG][/IMG]

[IMG][/IMG]

This is the last time she'll be seen with 33" as the 35" Baja Claws are sitting in the garage waiting for spring to arrive!!!

 

sorry to bring up a old thread, but i've been searching through all these old threads on runners with 3" + suspension lifts and come across plenty of pics of the vehicles with it, but no real other info.
what i am after is pics of the suspension components after such lifts. are the factory top arms used still, what angle is the top ball joint on etc.

i've just recently done a lift on my kzn185 and not sure if i've used the wrong strut/spring combo as i got about 4" of lift afterwards and everything is on weird angles. i am hoping that the springs might settle a bit.

thanks from down under.