285's on my 98 3.4L 6cyl 4wd w/ 2.5 lift???
Oct 13, 2006 | 10:22 AM
#1
Thread Starter
Registered User
Joined: Oct 2006
Posts: 14
Likes: 0
From: North shore Oahu, HI
285's on my 98 3.4L 6cyl 4wd w/ 2.5 lift???
I need some help figurin out tires...you guys seem to be the pros! I just picked up a 98 v6 3.4 SR5 4wd manual runner so I put Donahue racing coils(sick) and bilsteins in back...Can I run 285 75 16 s on my stock rims?????? Thanks for help
Oct 13, 2006 | 02:23 PM
#4
Contributing Member
Joined: Mar 2005
Posts: 1,909
Likes: 0
Yes but you may have some rubbing on the upper a arms. Some do and some don't. Seems to be no ryme or reason to it if you will or not.
Nice choice on the Donahoes. I had a set on my Taco and went cheap on the RUnner with Sway-a-ways and have been kicking myself since. Absolutely the best coil overs sold!
Nice choice on the Donahoes. I had a set on my Taco and went cheap on the RUnner with Sway-a-ways and have been kicking myself since. Absolutely the best coil overs sold!
Oct 16, 2006 | 01:34 PM
#6
Registered User
Joined: Jan 2006
Posts: 231
Likes: 0
From: Aurora, IN
I have that exact same setup you have. They fit but there is only like a 1/4" between the balljoint and arm and the tire. Also, if you come up over a hill fast when the truck comes back down you will have contact on the tire and arm. I had to buy new rims, In my mind for safety sake.
I ended up getting new rims and Chaos upper arms.....Bryan
I ended up getting new rims and Chaos upper arms.....Bryan
Thread
Thread Starter
Forum
Replies
Last Post
Big Little Bear
Pre 84 Trucks (Build-Up Section)
230
Nov 13, 2023 11:42 AM
FS[PacNorWest]: 1992 4runner - 5VZ swap - Lifted
Swim
Vehicles - Trailers (Complete)
9
Jan 4, 2016 10:47 AM
Cycles
86-95 Trucks & 4Runners
8
Sep 29, 2015 06:37 AM
genuinegemini
86-95 Trucks & 4Runners
2
Aug 3, 2015 04:56 PM
