It is decided then! haha

 

Soft top and SR5 Tacoma wheels should be on this weekend!

 

want to sell the soft top ???

 

If the offer is right.

 

so how goes the drive-train problem or have you fixed it

 

that was with my 86' I disconnected the front CV's and the problem still exists. I will fully remove and replace my CV's this weekend and change out the rear driveshaft with my spare and see what happens. And i will probably remove the BJ spacers until i can find a good diff drop, i don't want to be eating up CV joints.

 

brian what you need for the front is to put washers under the upper bump stop and add a diff drop very easy fix. I will pm you about top.

 

Yeah i know, but my lack of tools and a garage is hindering me. Awaiting your PM.

 

Put on the 31x10.5's from the 1995 4Runner and put on the soft top! GREAT FUN!!



\

 

now it looks like an expedition rig. looks good.

btw- are those lights still out?

 

Yeah i like how it looks now, just needs an ARB front bumper!

About the lights, i had to remove the wiring, it was leaving a gap in my top seal and causing water to leak into the cab, what i think i'm going to do is wire them up to the interior dome light.

 

what do ya mean? drill through the roof?

 

I'm going to try and avoid that at all costs.

 

Neat little vid (click the link)

http://s413.photobucket.com/albums/p...t=IMG_0348.mp4

 

so what do you mean by?

 

Re-run them through the seal for the top but not down the whole side like we had it.

 

ah, ok. that makes sense. i guess that means another meet at rb's

 

Yes sir! But first things first, time for new CV's and rear driveshaft, as well as calipers.

 

Up next is the T-100 front brake swap, put in my built rear driveshaft, a new set of CV's and my diff drop!

 

sweet. can't wait for dem pics