SAS'dToy's 1992 Pickup Build-Up Thread
#282
#285
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
I've also got to get another couple dies for my bender....I need an 1.5" 180* and I need a 1" square 90* and a 1" round die wouldn't hurt
#286
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
these are bad....coil-over mounts....$20.00 ea
And the upper mounts $9.00 a pair (I can get my laser guy to cut these)
Front Suspension
Pan-hard bar for axle $25.00
For Frame $20.00
And the upper mounts $9.00 a pair (I can get my laser guy to cut these)
Front Suspension
Pan-hard bar for axle $25.00
For Frame $20.00
#289
Contributing Member
Join Date: Sep 2006
Location: WA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
Those shocks are awesome. The whole truck is awesome. Any reason why ur wanting winche(s)? Couldnt you just have one that could be interchangeable from front to back?
Anyways the whole thing is awesome great job
Anyways the whole thing is awesome great job
#290
Registered User
Join Date: Apr 2003
Location: Juneau, Alaska
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Tell us more about your laser guy. Do you give him files or does he draw them up specifically for you?
Is the $9 for the uppper mounts the price from your guy?
Erich
#291
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
#295
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
My buddy Grant brought me an early christmas present...he got me 2 motor mounts and an engine mount to replace the one that was busted when I got my engine. I welded a stud into the block where the bolt busted the cast(not hard to do I found out)
Tonight I assembled the reduction box for my dual case setup...I used a Marlin 23-spline "total spline technology" Check out my bling'n ass case!
Tonight I assembled the reduction box for my dual case setup...I used a Marlin 23-spline "total spline technology" Check out my bling'n ass case!
#297
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
it;s not finished yet but right now it is soved inside about a foot, plug welded in about 20 places with a piece of other metal welded on it...then some more welds...and in the future, I'm chopping the bottom of the frame off(where it goes in) and welding some more then grafting in a piece of 2" DOM from the frame onto the tube
#300
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
dead stop on progress...I think I have the worst luck of anyone
listen to how my last night went
7:00pm last night....fine
7:03pm got real cold
7:05pm sick as fu*k
I spent the rest of the night puking my guts up and ????*ing my brains out..I could crap through a screen door and never leave a trace
4:00am I wanted to die
I have been in bed all day long..i drug the keyboard over to my bed so I can lay in bed and scroll the internet
I wouldn't wish this ???? on anyone...it came over me so fast it was unreal.
listen to how my last night went
7:00pm last night....fine
7:03pm got real cold
7:05pm sick as fu*k
I spent the rest of the night puking my guts up and ????*ing my brains out..I could crap through a screen door and never leave a trace
4:00am I wanted to die
I have been in bed all day long..i drug the keyboard over to my bed so I can lay in bed and scroll the internet
I wouldn't wish this ???? on anyone...it came over me so fast it was unreal.