Rix's 1988 Pickup Build-Up Thread
#1
Rix's 1988 Pickup Build-Up Thread
Here's some of the pics from over the years.
When I got it.... stock on 31's, burned up rockers and lobes on #4 and a bad t-chain.

then went to some half bald 32x11.5 AT's
Then some budbuilts

and some rock rails




Then I removed the stock rear bumper and tow hitch,chopped off the lower half of the rear of the bed


and built this.... thing.
When I got it.... stock on 31's, burned up rockers and lobes on #4 and a bad t-chain.

then went to some half bald 32x11.5 AT's
Then some budbuilts

and some rock rails




Then I removed the stock rear bumper and tow hitch,chopped off the lower half of the rear of the bed


and built this.... thing.
Last edited by Rix; Dec 6, 2009 at 07:48 PM.
#2
Then the engine almost blew on the way to reiter one day (#3 rod bearing spun)
So I had to build a new one.
engnbldr head w/oversized valves, 268c cam, Keith black pistons (lc engineering) balanced bottom end, LCE header, etc etc.


Then I put a front bumper on it, used from c-list

And a used chinese winch that later burned up. (replaced with a warn)
And I put on 33x10.5r15 BFG muds, which is how I wheeled it for a year or so.
And it was like that when this pic was taken


And its last run was the Busywild at Elbe hills



Along the way, I helped build this

and this

and this

And messed with this (it's currently back in the garage)

and started on my truck's SAS




It's currently back on it's wheels.... but far from done.
So far:
TG 6 shooter
TG rock rings (har har)
fzj80 elocker
gussets and all that
30 spline longfields
marlin ball gussets
Rear up front with a couple extra leaves
ETC ETC
So I had to build a new one.
engnbldr head w/oversized valves, 268c cam, Keith black pistons (lc engineering) balanced bottom end, LCE header, etc etc.


Then I put a front bumper on it, used from c-list

And a used chinese winch that later burned up. (replaced with a warn)
And I put on 33x10.5r15 BFG muds, which is how I wheeled it for a year or so.
And it was like that when this pic was taken


And its last run was the Busywild at Elbe hills



Along the way, I helped build this

and this

and this

And messed with this (it's currently back in the garage)

and started on my truck's SAS




It's currently back on it's wheels.... but far from done.
So far:
TG 6 shooter
TG rock rings (har har)
fzj80 elocker
gussets and all that
30 spline longfields
marlin ball gussets
Rear up front with a couple extra leaves
ETC ETC
#7
I haven't messed with the tuning on my built corolla, the truck is still in need of more parts, And all my other cars are in various stated of dissassembly.
So, the cressida is all that gets driven these days.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
tpd143
General Vehicle Related Topics (Non Year Related)
1
Jul 7, 2015 09:06 AM














































