8T8 4RUNNER's 1988 4Runner Build-Up Thread
#641
YotaTech Milestone-Two Millionth Post
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
not sure this link will work
http://www.autopartswarehouse.com/se...refValue=Denso
http://www.autopartswarehouse.com/se...refValue=Denso
#643
YotaTech Milestone-Two Millionth Post
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
EDIT....becomes $137
Last edited by 92 TOY; Feb 10, 2011 at 05:27 PM.
#646
YotaTech Milestone-Two Millionth Post
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
#648
Hope you get some good weather quick, too! Oh, and PAY FOR CAMS! Maybe ask Tod if he'll grind you some?
Who knows, maybe he'd like to branch into that, too, eh? haha. I doubt it. Have a good'n, bud! Tell Joe "Hi, from SOCAL!" lol.
#649
YotaTech Milestone-Two Millionth Post
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
nah...gonna leave the cams alone. and I will pass that along to Joe....thanks Mark.
#650
I hear ya.... I just thought, for some reason, you were going to have the heads checked out, etc., .......so I thought, after all I went through with the Original CAM.... IF you were taking the heads in, you could have em check out the CAM's, ya know? You did say you were doing the HG's, ...right? Just curious, as I'm watchin, bud. haha.
#651
YotaTech Milestone-Two Millionth Post
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
hey Chef....sorry I didn't reply. Yep....this is a head gasket / front end rebuild....seems to be my thing...hehe.
FED-EX delivered the TOYOTA parts!!!!!
AISIN clutch from Wab-Fab is due soon too.
Only stuff left is to get the injectors serviced and get belts.
SOON!!! VERY SOON!!!
EDIT:....gonna have to sort through the box to get my exhaust nuts out.
FED-EX delivered the TOYOTA parts!!!!!
AISIN clutch from Wab-Fab is due soon too.
Only stuff left is to get the injectors serviced and get belts.
SOON!!! VERY SOON!!!
EDIT:....gonna have to sort through the box to get my exhaust nuts out.
Last edited by 92 TOY; Feb 15, 2011 at 05:48 AM.
#657
YotaTech Milestone-Two Millionth Post
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
exhaust gaskets are offered to BIRDBRAIN.
likely going to have some other exhaust stuff left over.
mis-fired on a part #......my fault....ordered 4 exhaust manifold nuts instead of 4 motor mount bolts.....no biggie.
making up a smaller list of needed parts.....particularly some bushings for the fuel rails (thick rubber washer thingys) and nuts to hold it down (I had to chisel a nut in half to remove it.....way back when)
also belts
likely going to have some other exhaust stuff left over.
mis-fired on a part #......my fault....ordered 4 exhaust manifold nuts instead of 4 motor mount bolts.....no biggie.
making up a smaller list of needed parts.....particularly some bushings for the fuel rails (thick rubber washer thingys) and nuts to hold it down (I had to chisel a nut in half to remove it.....way back when)
also belts
#659
YotaTech Milestone-Two Millionth Post
Joined: Jan 2009
Posts: 12,009
Likes: 122
From: Northeast Pennsylvania
almost there.....
need some warmer weather....some more money and then, it's on.
have to re-read this thread to see if I left any notes for myself about other stuff we will need.
I don't know who is more anxious...me or Joe. I just want to hear this thing with headers.....hehehe















