Well the jb weld blew out, gonna get another head

 

You WILL be MUCH more at ease doing so... Sorry it came to that though. My machinist welds stuff like that on aluminum all the time... Especially Plug threads and some other things as well(cam journal cap threads being TOAST/needing heli's that will stay put).... BUT, it might cost a bit if you're not friends with an aluminum welder, ya know?

Gonna grab a Top Line bare head and swap all your goodies over? What brand, etc?

 

my boss found one used that has been checked out good, gonna save this head and get it rebuilt, my machinist said that alot of people who do that on 22r's tap them out to 18mm and put a old ford plug like the one the old fe's have, so id be running the same plug that my ford uses

 

might be tradin the ford for a 81 toyota, mostly stock, hope this works out, 81 is my favorite year!

 

So I git a line on a offemhauser c series intake, what are the advantages to this intake over stock?

 

does anyone have a 20r intake? thats the last part i need to get my pickup back on the road!

 

Don't have one, but saw one, today, at Pick-Your-Part. The whole engine was there, but by tomorrow, could likely be picked clean. First things to go(Diff's, Engine, Harness, Trans, Buttons/switches and connectors) Not necessarily in that order.

I might be back there, soon, and if one is there, I'll grab it. (SO UPDATE this page the second you get one, ok?)

 

if you could grab it it would be much appreciated! boss ordered me what he thought was a 22r head but it was a 20r head, completely rebuilt with new valves and everything! now all i need is the intake and i can get my pickup back on the road!

 

I'm not EVEN trying to be a Debbie Downer here... More like a "Cautious Californian", hahaha... BUT;

Did you do the block and such according to all the specs for a '20r/22r'hybrid? I figure you have... Just making sure, cuz from what I remember... The stroke being different and head being meant for different pistons... there's some 'Deck' factors to consider, etc.

I WILL take a look for it next time I'm there, man... Already wrote it down on the list along with many others who've asked me to look for things, "like L-Trim", etc., lol.

 

yea i got a 82 celica motor that has dome top pistons so im all good there!

 

Oh goodie.... an official Celica-22r/20r head Hybrid! Gonna be BA!

Sorry, no go on the intake... Couldn't get away today, so I worked around here. Couple things I want... just can't seem to get away when I want, hahaha.

 

ok i might be going and getting a whole 20r for $20 tomorrow so ill let ya know chef!

 

got a complete 20r engine for $20 and a old cd player i had sittin around, guy ran it out of oil and threw a rod through the block, good for parts still!

 

Sorry man.... Haven't been back, but asked a guy I know who WAS there, yesterday, to look..... It's gone. The WHOLE truck, not just the motor.

Great find. Hopefully nothing wrong too bad with the head.... Maybe take it into the school and do a valve job in a day, be done with it? Viton Seals, all new Valves, 50$. BUT, sure, it might not need anything but a valve grind?

Best wishes, man! Lemme know if you're still looking, ok? If I see one, I could call ya.... PM me your #, ok?

Have a good one...

PS> This weekend, it's 50% off sale, all weekend, on EVERYTHING! Might be grabbing some things, so please, lemme know if you want me to keep my eye out(soon as you know whether the head is any good), K?

 

Oh I don't need the head off the part like, my boss bought me a fresh rebuilt 20r head

 

DANGIT, ........my brain, man! hahahaha... Sorry, that's right. Duhhhhhhh! So, what I MEANT to ask was, ... you grabbing the intake off it? So you're set?

 

grabbed the intake off and cleaned it up, gonna get my pickup back tomorrow!

 

well it runs, but to me it dont seem like it has the power it should. and i know the timing is off by the way it sometimes diesels when i shut it off. but i was driving it to a buddys farm tonight and it lost power and died, when i started it back up it pumped alot of blue smoke out the tail pipe, but never smoke since, anyone got any ideas? cam timing is perfect, distributor is not a tooth off, im thinkin something in my carb went tits up

 

also blew up my rear end last night, thankfully i had another 3rd to swap in, i love spare parts! and i will never weld a rear end again

 

Nice that you had the other 3rd! ...........

Not sure why it would lose power, especially since everything is new.. Sounds/seems to appear like fuel related. Gotta get the timing right though. And with a Hybrid.... not sure on the timing specs. "0* BTDC"? Or is it still 5*?