very nice! my grinder gave up on me -.- wont be makeing my half doors today as i had planned! darnit!

 

these are the doors i picked up for half doors, pretty beat but why buy a good set of doors if you cutting them up right??? and they were cheap, 20$ for the pait cheap

 

my paint materials will be here wensday or thursday, ordered a dark smoke gray, not sure of the color, it came in a automotive painters kit, everything includeing primer, paint thinner, the paint and clear along with a few filters, mix cups and mineral spirts for wipe down cost me 75$ friends with benifts thats for sure!

 

ahhh, half doors, eh? lol. So, hopefully you'll have enough paint since you're adding another set of doors to the project, eh? hahaha. JK, I'm sure it's not much.

 

yeah my girlfriends dad didthe inside and outside of his j**p with one kit, then had to redo the outside because humidy got too it and he still has some left for touch up so i figure it doesnt need much, bought my paint gun yesturday but forgot to get the regulator still have some sanding to do on the truck which ill most likely do tonight, then thursday ill tow it over to his house and well shoot it

 

Can't wait! You going to get the decals from that guy on here? I LOVE THOSE! lol. I know, not necessary and you probably don't want em... Just curious.

Congratz..... the countdown is ON! hehe

 

well darn, girlfriends dad leaves for the boat tonight (offshore worker) but ill prob just do it myself then, nothing but a learning experience right? i really wish brian would chime in and gimme a basic run down on wat he prepped and all that, or i can just check his thread? maybe send him a pm prob, shouldnt be too hard

 

Hahaha... That last post was funny... "Just thinking/kinda outloud!" lol.

Gotta love Humilty

Hey, .......... do what you think is WISE! If you really want this to come out sick, ... just do all the sanding/priming and then wait for him. There IS really something to experience when it comes to "smooth coats".... BUT, you can also watch lots of video's on it, ya know? That can't hurt...

I think I mentioned, not sure... Brian had LOTS of help from a guy on here I've not seen chiming in, in a while. His name is Mike, but his ID is unique... Can't remember it off hand. There are QUITE a few threads on here for 'self painted rigs'... With lots of 'how to' with many different styles, etc. One of them in particular that I'm subscribed to. I'll see if I can find it.

Just do it right, the first time, please? lol... Stripping it down again is NOT lots of fun and wouldn't be really a 'learning experience' that you need, ya know? lol. Dry/Arid conditions are best... And wetsanding and interim sanding and all that... it's an ART! I've seen INCREDIBLE Roll on paint jobs even... But those guys REALLY knew what they were doing (the ones that turned out REALLY clean anyway).

 

yeah mark i know what you mean, i started cleaning my 85 sfa out yesturday, ill prob rebulild the knukcles on it and give it a fresh coat of paint along with maybe a gusset, id like to change my half brace 82 axle out with the 85, just for support, then with the rear houseing i have do the same thing, its also out of an ifs truck so its wider!

 

ordered my window seal and trim for thw windshield, paint is going to be here thursday

 

.......................WOOT! lol.

Sounds good, Josh... Can't wait for PICSSSSSSSSS! hehehe.

 

me either mark, was gonna pull my windshield tonight but idk if i should wait after paint, then redo it? hmmmmm?

 

just broke my windshield

 

here todays mistake! alright wells here the rust in the window frame, not too bad at all if you ask me hey and what would you guys do? bondo over this or just replace the fender? bondo with proper rust treatment of corse.... and well heres me being.. well me... on the mailbox.....

 

guess the picture idnt take, what would you guys do about this fender? looks fixable to me...

 

fender looks completely fixeable, very easy rust fix!

 

thats what i was thinking, bondo over itafter meteal treating it.

 

thinking of buying a weber, 32/36 any ideas guys? manual choke? or eletric?

 

found an elocker for 200$!! let the mods begin!

 

i got teh 32/36 on mine, electric choke it came with the pickup so im not gonna complain but idk how to wire it up