Since I have sold all of my Toyota rigs, it's time to sell all of my parts. I will try to get pictures at some point but right now I'm laid up with a broken clavical and bruised ribs from a mountain bike crash earlier this week. A lot of you know me anyway. All parts are located in Auburn, AL, paypal fees and shipping not included and will only ship parts small enough to fit in flat rate boxes. Reply here or pm me or text me at 334-eight 50-zero 613


4 cylinder diff with aussie locker and 5.29’s-was my spare, has not been run since gear setup by Marc Zaboth- $400

Rear stock axle shaft IFS width with bearings-$50

2 alternators-$25 each
W56 transmission/ top shift tcase from stock 85 4runner-$250
Top shift tcase-$100
Forward shift tcase-$30, case has been separated and I don't have the bolts

22r head clean-appears to have been worked some -$75
22re partially disassembled-head and intake have been separated-I still have those too-ran when pulled but had bottom end knock-$200
22r heads (2)-stock-$50 each
Vacuum distributors (2) -$25 each
Rear driveshaft-believe it was ext cab truck??-$20


1st gen truck fenders (set)-$50
22re ECU's (2 or 3)-$25 each
Thorley header for 22re-stainless-$200
Misc switches-$5 each
Steering boxes (2)-think I have 2 IFS boxes, one may be a V6 -$50 each
Gas tanks (2)-both good-$30 each
Heater bezels, '85 to '89 $30, older one $15


Valve covers (3) -$15 each
22r intakes (3) -$25 each
Steering pumps (2) -$20 each
Stock exhaust manifold -$20
Efi distributors (2?) -$25 each
Coils-several-$10 each


Gauge clusters (3) 1 old, 2- 85 up-$25 each-no 85 and up SR5 clusters
Rear view mirrors (2)-$10 each
Grey interior pieces-85 up-make offer
Tan interior pieces-85 up-make offer
Factory rollbar-$20
Factory rollbar cover-$20
Stock longside front axle shaft-$10

Lots of brackets-offers
Hvac stuff-offers
Good 1st gen truck grill-$30
Fair 2nd gen truck grill-$20
Fuel lines-offers
Misc. hoses -offers
Box of stock wiring and connectors-buy something and it's free
2 steering columns with keys- $25 each
Several steering shafts-offers
Pedal assembly-$20

Narrow rear axle complete but diff has bad pinion bearing-$50

Solid axle wheel hub-missing one stud $20
Solid axle spindle with a little surface rust $15

Ubolts and flip plates with shock mounts for 1 ton axle-$40

Set of leaf springs from an '84 truck-2 front leaf springs and 2 rear leaf springs - $80

Box of stock ubolts, plates, and stock shackles-$30

CO2 tank with non adjustable regulator and hose (the source brand) $150-believe that the tank needs to be re-certified (out of date)-comes with mounting bracket and adapter to mount to 2" or 2.5"?? tubing-will fit factory 1st gen 4runner rollbar

FJ80 brake master cylinder with reservoir (aisin parts not aftermarket)- $50

Power steering reservoir-$15

This is all listed from memory as well since I'm unable to go dig through all of the stuff right now.

Feel free to come over and make me a price on everything and take it all

 

Longfields and diff covers sold

 

hi looking for the front passenger seat reclining handle and rear handle that release the seat foward on the same seat for the 1 st gen 4runner how much shipped to 90278 thanks.

 

Don't have anything for seats, sorry

 

Any pics of the fenders/grill for the first gen?

 

What kind of tan interior pieces do you have? Looking for some for a 2nd gen PU.

 

I'm looking for brown and tan interior pieces for a 1st gen 4Runner, especially the plastic pieces behind the area where the top of the seatbelt attaches next to the driver's head rest. I'm in the DC area, so let me know what shipping will be. Thanks for all your hard work!

 

I'm looking for the heat and air control switches.. 1980 Toyota

 

Need one ECU, one SR5 cluster for 85 and up, the cover, and the box of wires shipped to 70070 please

 

Have shifter bezel and/or center console?

 

Were the gears and locker purchased brand new before being installed? What brand gears?

 

I'll take a V6 steering box, shipped to 04101. Do they fit in a flat-rate box? Does a top shift transfer case fit in a flat rate box?

 

Do you still have the Thorley header?

Please let me know ASAP.

 

Have anything for a 99 and up? Specifically front end and Interior pieces I'm looking for.

 

no response from OP since oct 2014. let it die