Notices
Vehicles - Parting Out Parting out a vehicle, post it here

FS[MidWest]: 1994 4runner driveline and powertrain part out.

Thread Tools
 
Search this Thread
 
Old Apr 27, 2014 | 11:08 PM
  #1  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
1994 4runner driveline and powertrain part out.

Going to be tearing all of this out this in the near future to make room for American parts!

Engine - blow'd up, but all accessories will go with, not the harness. Seems to be a rod bearing failure. $200

Automatic Transmission- works great, shifts perfect. $150

Transfer case - same. $50

Front and rear axles - couple . Ne leaky seals but good otherwise, brakes included. 4.56 gears, Open diffs $100

Wheels, Aluminum 15x8" wheels, Enkii, $150

Shocks and lift parts all around- ball joint spacers and rear spring spacers. KYB mono max shocks. 2" BJS up front, 3" coil spacers in the rear. Also has and air lift setup in it, bags inside the rear coils. 5k miles on all of it, all great condition. $250 for all of it.

Will be cutting out all of the front and rear suspension to make room for SAS front end and leafs on the rear. So all of those removed parts are for sale as well.

Joe 402-499-4387 located in Auburn, NE. Will ship parts, PayPal accepted.

Last edited by Jthod; Jun 24, 2014 at 07:15 AM.
Reply
Old Apr 29, 2014 | 05:15 AM
  #2  
Erick561's Avatar
Banned
iTrader: (7)
 
Joined: Apr 2014
Posts: 292
Likes: 0
From: I ship from New London Connecticut I PriceMatch
do you have a v6 clutch hard line in decent shape? I had a potential customer ask for one but you gotta price it reasonably.
Reply
Old Apr 29, 2014 | 08:45 PM
  #3  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
auto trans
Reply
Old May 8, 2014 | 09:39 PM
  #4  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
Bump.
Reply
Old May 27, 2014 | 07:20 PM
  #5  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
Bump

Cheap parts, all parts OBO!
Reply
Old May 29, 2014 | 05:49 PM
  #6  
kauaicuda's Avatar
Registered User
 
Joined: May 2014
Posts: 7
Likes: 0
engine mount brackets and isolators for a 3.0?
Reply
Old Jun 9, 2014 | 10:03 PM
  #7  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
I think I may end up using part of the mount for the swap, so I'm going to hang onto them

Tires are gone, still have the wheels.
Reply
Old Jun 19, 2014 | 12:46 PM
  #8  
95 fo'runnerheadache's Avatar
Registered User
 
Joined: Jun 2014
Posts: 9
Likes: 0
Question MAF/ Air flow meter?

I need a Air Flow Meter for a V6 3.0l. I got a 95 but i think your 94's MAF is the same im sure, how much for the whole assembly? Air box, filter, and sensor?
Reply
Old Jun 20, 2014 | 08:18 PM
  #9  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
$35 plus shipping?
Reply
Old Jun 24, 2014 | 07:17 AM
  #10  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
Bump!
Reply
Old Jun 30, 2014 | 08:18 AM
  #11  
catch847's Avatar
Registered User
 
Joined: Jun 2014
Posts: 7
Likes: 0
Rear leaf spings? shipped to 54820
Reply
Old Jun 30, 2014 | 01:34 PM
  #12  
Roark's Avatar
Registered User
 
Joined: Jan 2011
Posts: 1,051
Likes: 0
From: Memphis, TN
Originally Posted by catch847
Rear leaf spings? shipped to 54820
Pretty sure the rear suspension is coil sprung, so no leafs.
Reply
Old Jul 1, 2014 | 11:40 AM
  #13  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
^^^^^
Reply
Old Jul 6, 2014 | 07:00 AM
  #14  
CarlosAutomobiles's Avatar
Registered User
 
Joined: Jul 2014
Posts: 7
Likes: 0
Hi, how's the block? is it rebuildable?
Reply
Old Jul 6, 2014 | 06:01 PM
  #15  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
no idea, not going to strip it.
Reply
Old Jul 7, 2014 | 02:21 AM
  #16  
CarlosAutomobiles's Avatar
Registered User
 
Joined: Jul 2014
Posts: 7
Likes: 0
how much you want for it?
Reply
Old Jul 7, 2014 | 06:18 PM
  #17  
Jthod's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 77
Likes: 0
From: Auburn, NE
Oil pan to intake, with accessories, $175. Has new cap/rotor/plugs/wires.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Goddamnboh
3.4 Swaps
12
May 11, 2016 09:22 PM
wberry85
86-95 Trucks & 4Runners
11
Jul 6, 2015 03:24 AM
94hiluxZE
86-95 Trucks & 4Runners
0
Jun 22, 2015 10:42 AM
bobbybouche
86-95 Trucks & 4Runners
0
Jun 18, 2015 10:22 AM
Dr. Evil
95.5-2004 Tacomas & 96-2002 4Runners
1
Jul 8, 2002 04:41 AM




All times are GMT -8. The time now is 04:09 PM.