looking for a set of PP 1" lift springs for 3rd Gen 4runners

i know its a long shot but maybe some of you guys had them prior to throwin on OME or tundra lifts

 

I'm also looking. So if there is two sets floating around let me know.

 

Any of you guys interested in 99' front coils and downey 1.5" rear. It sets the truck pretty good with about a 1/2 rake to the rear?

 

rake? what is that?

the 99 front coils will lift a 98 limited an inch? the ride will still be the same as what i have though i believe

 

I would guess that the 99' coils would be slightly stiffer but they ride pretty good. Rake means the rear was about 1/2" taller. I will sell these for $150 obo. I didn't get around to cleaning the front coils, that is just dust on them.

 

Still have these springs for sale??

 

I second "still have these springs for sale?

 

Your springs must be as bad as mine. 10 years of boucning will do that I guess.

 

Haha....yeah...I'm looking for PP but can't see putting those on when they're 300 and I can get OME for the same price and get twice the lift! I just want a moderate lift to separate me from the mall runners a little more.

 

How's the Airlift bags been working for you? Do you have the compressor too? If I do the 99 coils lift then I will most likely put those back there for when I haul the boat around.

 

No I don't have the compressor, too expensive. The system works great, I leave them inflated all the time, gives the rear a slight lift and the ride isn't bad. Has been worth it but still looking for PP or stiffer springs to help with body roll and the airbags only go so far....