trannies, bumpers, brush guard, swaybars
04-26-2008, 03:31 PM
#1
Registered User
Thread Starter
Join Date: Apr 2006
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
trannies, bumpers, brush guard, swaybars
Here are a few items that I have collected due to upgrades. I need to get rid of them so all prices are flexible. Shipping is on the buyer. I am reluctant to ship the big items; however, I will for the right price or legwork. All prices are negotiable. Please feel free to ask questions. Located in Clarksville, TN 37043.
Great brushguard. Zero fitment issues. I am only selling it because I've built a bumper and about to SAS. - $200
Herculined front bumper. Only selling due to above reason. Herculiner is faded, but some black paint would bring back the shine. There are two holes in the top for foglights. - $75
http://i120.photobucket.com/albums/o...t/fbumper2.jpg
Herculined rear bumper. Once again, selling due to above reasons. The plastic top runner has a cut-out for a C.B. antenna as does the side of the bumper. The bottom-right of the bumper had a rip from my buddy's jeep putting its towhook in it. It's very hard to see and can be bent back in place with a crescent wrench (I may do it before it sells). The Herculiner is in the same condition as the front bumper. - $40
One front swaybar and one rear swaybar from a 1995 4Runner. They're in good condition. - $40 a piece.
R150F transmission and VF1A transfer case. The transmission has a crack in the housing. The transfer case needs a new rear output shaft seal. - Tranny - $50. T-case - $50. Both - $80.
TH350 2wd tranny. In great condition. Used in my sister's C10 until we put a 700R4 in for her commute to college. - $250
Great brushguard. Zero fitment issues. I am only selling it because I've built a bumper and about to SAS. - $200
Herculined front bumper. Only selling due to above reason. Herculiner is faded, but some black paint would bring back the shine. There are two holes in the top for foglights. - $75
http://i120.photobucket.com/albums/o...t/fbumper2.jpg
Herculined rear bumper. Once again, selling due to above reasons. The plastic top runner has a cut-out for a C.B. antenna as does the side of the bumper. The bottom-right of the bumper had a rip from my buddy's jeep putting its towhook in it. It's very hard to see and can be bent back in place with a crescent wrench (I may do it before it sells). The Herculiner is in the same condition as the front bumper. - $40
One front swaybar and one rear swaybar from a 1995 4Runner. They're in good condition. - $40 a piece.
R150F transmission and VF1A transfer case. The transmission has a crack in the housing. The transfer case needs a new rear output shaft seal. - Tranny - $50. T-case - $50. Both - $80.
TH350 2wd tranny. In great condition. Used in my sister's C10 until we put a 700R4 in for her commute to college. - $250
Last edited by Spinnbait; 04-26-2008 at 03:40 PM.
04-26-2008, 04:00 PM
#2
Registered User
Join Date: Apr 2008
Location: Ypsilanti, MI
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
what gen 4runner does the brush gaurd fit? same goes for front and rear bumpers.
i'm interested if it works with an 88. shipping can be done cheaply via Grey Hound bus
i'm interested if it works with an 88. shipping can be done cheaply via Grey Hound bus
Last edited by 4RunnerFreedom; 04-26-2008 at 04:01 PM.
04-26-2008, 06:47 PM
#3
Registered User
Thread Starter
Join Date: Apr 2006
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
1995 4Runner. I'm not sure about your application. If the bolt holes for your front "tow hooks" are in the same location then it will bolt up. I do not have a problem shipping if the buyer takes care of the costs (in addition to the asking price).
).
Trending Topics
05-05-2008, 05:08 PM
#8
Registered User
Join Date: Feb 2008
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
wel i know a lil about fit and the grill gaurd will fit 89 toy 95 truck and 90 to 95 runner thats direct fit but ya always could make it work with the 88 i sold my old brush gaurd to a guy with an 84 and i own a 90 p/u
hey on the trany how low will ya go and where ya located
hey on the trany how low will ya go and where ya located
05-05-2008, 05:50 PM
#10
Registered User
Join Date: May 2008
Location: Tulsa, OK
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Would you be willing to ship the brush guard? I am in Tulsa OK. markkcrane@hotmail.com
06-30-2008, 08:19 PM
#16
Registered User
Thread Starter
Join Date: Apr 2006
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, sorry if I missed any replies or pms. I've been a bit busy here lately. However, if anybody wants this stuff, just let me know what you're interested in and a fair price on both sides. I promise to be more responsive as I think I missed a few questions.
